VPN

Hi,Extreme newbie to the Cisco IOS universe here ;-/I'm trying to configure a Cisco 851 router using SDM to allow several Windows XP laptops to connect to the 851 device via Cisco VPN client version 4.02.I have a static IP defined for WAN interface, ...

1) What exactly is the E-Mail proxy function on the concentrator? Is the concentrator going to be a proxy for smtp/pop3 traffic without a SSL tunnel being established on a browser? I just don't understand the concept.2) Can the SSL VPN client work in...

Hello,I'm trying to setup client VPN on an 1800 that already has a GRE VPN tunnel. Apparently, the router tells me that I cannot have an EazyVPN server as well as GRE on the same interface. Does anyone know a workaround to this? I'm simply just tr...

Hi all,I have a remote office with four bri connecting to two pri on the remote site.As a reference I used "Cisco - configuring MPPP for multiple bris using rotary groups"and I had no problem on reaching my goal.Now the problem is that the router kee...

We want to know if it is posible to login for asyncronous interfaces with certificates

Hi,I need the same option as in DDR. EIGRP must not be the trigger nor keep the tunnel active. Any ideas ?Regards bjornarsb

i have a query that can we have ipsec running in transport mode without having gre tunnels .is it possible. sebastan

Things were fine with VPN version 3 and early version 4.x. 4.6 used to work sometimes, but now it always hangs at the "Securing comunications channel..." stage. [I have to use the task manager to kill vpngui at this point.] I have no idea how to d...

When I have Cisco Secure Desktop disabled on the 3030 concentrator the SSL VPN client works perfectly. If I enable Cisco Secure Desktop on the concentrator I am unable to use the SSL VPN client when I connect. I have the option checked to be able t...

I have a question, is related about VPN access, I need to connect to a remote VPN server, so I installed the VPN client program on my pc... I was reading technical docs, about it, but it's a bit confusing for me.. now that I can load the PDM, it hav...

Hi!I'm testing webvpn to a CS2801 IOS router with version 12.3(16)T. I'm not able to access my router via https or http. Heres what o get:*Jan 18 12:52:55.163: SSLVPN: SSL Handshake Not done yet.. :*Jan 18 12:52:55.163: SSLVPN: SSL Handshake Failed :...

Does anyone know if it is possible to allow different access to groups that connect via the SSL VPN clients.If I understand the Concentrators documentation correctly, all SSL thick client and webVPN users fall under the Base group, there's no method ...

HelloI've got Windows XP/SP2 client connecting to a PIX 6.3.5. The Windows client needs to use IPSec transport mode. Have a look at this document for a complete config:http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_exa...

Hi all:I want to configure two VPN Concentrator 3015 with load balancing, but i have not found documentation about how the redundancy works in the private interface.I have got some doubts about a network schema like this:Imagine that there is a rout...

I just bought a cisco 3005 vpn concentrator, i managed to configure the ssl vpn and ipsec vpn everything worked fine, after that I decided to upgrade the software release to the “4.1.7.J 21-DEC-2005”, i logged on back again and the link “Configurati...