Hi;i have a pix firewall 525 and i configure as vpn server with one vpn client account (username ,password). My point is how i can configure my firewall as to use multi accounts.thanks
As per info availiable, PIX ver 7.0 is able to to application inspection.Is there an equivalent command to ip nbar protocol-discovery on the pix os ver 7.0 ?In my present scenario I am using this command on my router interface which is connected to I...
I am trying to make a VPN connection from inside out firewall to an external VPN server. This goes through a PIX 506E that was not originally setup by me.The connection finds the correct IP, but gets stuck at the validation and authentication of use...
Currently i have a router that is setup to accept inbound connections from users using the cisco software vpn client, which is working fine. Now i need to expand this routers capabilities. I need it to support a tunnel to another router as well. The ...
HiI've got a main site, this site uses a pix to protect from the internet. Also on this main site is another pix which connects/protects the site from the WAN. We have a remote site, also with a pix protecting from the internet. We have created a s...
I have a site to site vpn link. From one side you can search for devices on the other side by ip address but once found no connection to any shared folders can be made. All ideas gratefully accepted.
Hello,I am using VPN client 4.0.5 to connect to our Citrix ICA server at work.A couple of days ago, I turned off my computer without first terminating the VPN client - and now there is no way I can connect to internet. I have tried repairing IE to no...
HiDoes any one know the effects of different encryption algorithms on CPU usage levels on routers (lower end 1700, 1800, 2600, 2800 series) encrypting with software based encryption level, or any info regarding this issue.Thanks
To use a number in replace of the id_name in the statement of: access-list id_name permit ... Where, the id_name could be a number such as id_name = 1 to 99 or id_name = 101 up for instance: access-list 101 permit ... My question: Is there any restri...
Assume a network topology is like this: A PIX with 3 interfaces:inside interface (private static IP of 10.10.10.1)outside interface (public static IP of 69.110.38.35)DMZ interface (private static IP of 30.30.30.1)The internal clients (private static ...
Dear Sir,I have configure v.92 8 port modem on cisco 3745 router which has IOS image Version 12.3(7)T12. I have configure the modem with all basic requirement but when its comming ot ppp authentcation , its dropping the connection and giving the erro...
I read an article and excerptted a section as follows: "access-list 10 permit 192.168.3.0 0.0.0.255 This list allows traffic from all addresses in the range 192.168.3.0 to 192.168.3.255 You can see how the last entry looks similar to a subnet mask, b...
Hello, Guyz, i am trying to implement ONLY accounting on PIX. The main puprose is only to log the commands/changes made on pix by users. But i am unable to find any sort of configuration which do this. i have tried capturing Telnet on local interf...
Does anybody know of a document that is available that lists all of the security concerns (viruses, hacking, etc.) when allowing VPN tunnels into and out of a network (for both LAN-to-LAN and client to LAN?) It does not have to be a Cisco document, ...
