VPN

Hi there,I've begun testing with a colleague of mine the new release of the client, the release that is supposed to solve all the problems for single processor machines....I've noted two things:1- The packet count doesn't display correctly2- The disc...

Hi, I would like to authenticat users that dial in with use of certifcate.how can this be done. I have Cisco router (in lab 1720) with ISDN BRI and dial-in user are XP-client the user is autenticated against radious (this is working fine with users i...

Is the Dialer-List filter and the load-threshold tied toether? Can a 2nd line be brought up by traffic exceeding the load-threshold which is not "interesting" traffic as defined by the dialer-list? If line one comes up, can line two come up because...

Is it possible to send asynchronous traffic over the D Channel of a PRI ISDN circuit? We have a requirement for a number of terminals to communicate with HO over the D Channel due to cost limitations. We will be using Async PPP to the central router ...

Hello,I would like to create a L2TP over IPSEC tunnel between my Windows XP Pro PC and a CVPN3000 via Internet. PS : My PC is behind a PIX Firewall with a static NAT.I followed this Cisco configuration Example but the result is a simple L2TP connecti...

Hi, Since I upgraded my PIX 515E in 7.0.1, I can't recover a CRL ! I did a "debug crypto ca", look my result : CRYPTO_PKI: status = 0: failed to select RA encrypt cert CRYPTO_PKI: status = 1799: failed to sign the data CRYPTO_PKI: status = 65535: PKC...

Hi all,I am using cisco pix 6.3(1).I need to provide remote access vpn to one company.I found that when i specifiying specific port for NO NAT traffic all ports becoming blocked. I also tried to implement this via split-tunnel but found that it's ig...

Hey everyone,Here's my question:We have all remote VPN users log into our resident firewall here at the corporate office. The internal addresses here are 192.168.1.xxx. We have a site-to-site VPN setup on the same firewall to a remote office. The int...

I must be missing something. I have an AS5350 with a T1 (not PRI) attached. The line rings, but the modems never pick up. I think I've configured the controller T1, group-async and modem lines properly, but obviously something is wrong. What have...

Can anyone supply me with the order of operation of ingress access lists, specifically regarding IPSec?I realize that the first thing that is done is the IPSec (isakmp / esp) packet is checked against the ACL (ip access-group 120 in). Then this packe...

Dear Supports,Currently, we have two cisco 2621XM with IOS 12.3 and we config these 2 routers for VPN throug Wireless broadband , it is working well about 3 ot 4 hours then connectivity of both routers drop down and every time I need to restart the r...

Hello,Would like to ask inputs if PIX 506 on the remote end will work with a site-to-site vpn setup wherein Firewall at the HQ office is using Sonicwall Firewall with capability of site-to-site vpn?Is there a workable setup already just like this sc...

This is very unusual. The pieces involved are 3030 concentrator and VPN client.There are two "internal networks", lets call them 172.16.0.0/16 and 172.19.0.0/16. When all works well for about 1000 users both networks are reachable with pings and we...

I am trying to ping a certain hanful of machines from VPN but it times out. I can ping other machines on this network segment from within VPN. I can also ping the machines that are not pingable, when I am not on VPN(Within the corporate network...

Hi,I'm trying to regulate access of ACS groups to a concentrator: 1 group should only have WebVPN access, another should be able to also use Ipsec. I've tried using user-assigned filters, access-times, group-locking, all to no avail.I don't think I c...