VPN

Hi,I haven't found any example about configuring L2L and remote access VPN (with local authentication) on the same interface.Is this possible?ThanksJuan

Please what are the effect of increase the upsream power level ?

hi, we have a problem in Germany 837 shall connect pppoe over ADSL by DDR. The ATM0 is not comming up. can somebody tell me, why the actual IOS 12.3(11)T is not supporting bundle-enable dsl operating-mode annexb-ur2 (it is indroduced with Release 12....

Hello!Here's what I'm trying to do. I'd like to have a number of HUB routers VPN into our Main Office. From each HUB, there will be a number of SPOKE routers attached via VPN. All of the HUB routers will have a static ip address while the SPOKE's ...

Hello, Do anyone know that PIX 501 3DES/AES VPN/SSH/SSL have users license or not? and if so , how many users does it can support? I am very new with pix firewall. Plz advice. Thanks in advance.Sakdavin

I have a mail server in one site (M1) which sends and receives mail to the internet fine. I have a server in a second site (M2) which is the same. They are both in the same AD forest / domain and all network comms seem to work perfectly. DCDIAG an...

've a PIX 535 (6.3.4) with an ACS 3.2 in place. I'm using RADIUS with local User DB for authentication. I've installed the Cisco VPN Client 4.0.3F on my PC. When I connect to the PIX a logon windows prompts for user id and password. Then i get this ...

Hi all,We installed the win2003 L2TP server and the PIX is our firewall.But we can't connecte to L2TP server from internet(PPTP is OK)here is our ACL. access-list acl_outside permit icmp any any access-list acl_outside permit udp any host 61.222.1.18...

I have a little probleme.I have a cisco 2600 router on my central site on Paris.I have one cisco 1700 router on Milan and Venise site. Both router have a default route pointing on Paris. The two router cisco 1700 are connected via BRI interface to PA...

I have a coworker who believes my 1720 running Easy IOS VPN can only accept one connection from a Cisco VPN client (IPSec with nat-t support) at a time. He suggested I move to MPPE (PPTP) as it support smultiple users.I think he is wrong, is there d...

We recently deployed a 3020 concentrator and the 4.0.2 (B)VPN client (used with Windows 2000). It was originally configured to only support IPSec connections over UDP 10,000.Then, we had a new requirement to support several users behind the same Int...

I Want to create VPN over leased line. Kinle let me know the procdure.

Hello Guys , I have a 1721 router with only 1 default Ethernet port.Due to a particular network scenario i am not using my serial for WAN.I am using my one Ethernet port for both my lan and wan by giving secondary IP. I want to know that can we con...

I have a client in UK who has two offices connected via a SHDSL connection running at 4Mbs with RJ45 presentation at each end.Client is looking for 2 Cisco routers to connect this link.Does anyone know of a cost effective router that can support thes...