VPN

I have a client in UK who has two offices connected via a SHDSL connection running at 4Mbs with RJ45 presentation at each end.Client is looking for 2 Cisco routers to connect this link.Does anyone know of a cost effective router that can support thes...

Hi all,Will it possible to fire both B-channels at the same instance of time.If there is any command to do that?By giving "PPP multilink" and "dialer load-thresold" command, firstly only 1 B-channel will be fired out and after some time,2nd B-channel...

Hello, I am looking for a way to configure AES or 3DES as a Stream Cipher. We have requirements to do so, and cannot find a way. The only stream ciphers I have found that IOS supports are RC4 and now SEAL. Any ideas if there is a way to use AES in ...

I am trying to set a LAN-to-LAN connection my end ( 3745 router ) other end ( VPN Concentrator ).For some reason we can't get the tunnel up.We, from the 3745 router are making to the Concentrator, however that seems to be where the connection is fail...

After changing the outside ip address I am no longer able to establish vpn's, remote access (IPSec/PPTP) or connect to the PDM from allowed IP's. However all other Pix functions seem to be working. When I examine the logs during a tunnel setup I see ...

We have a 1720 router IOS 12.3(9b) that keeps getting errors similar to the following, anywhere from every few minutes to every few hours:Jan 15 22:46:19.937: %C1700_EM-1-ERROR: packet-rx error: ESP authentication fail, id 110, pool offset 0Jan 17 04...

Hi,I've a PIX 535 (6.3.4) with an ACS 3.2 in place. I'm using TACACS+ with external Windows User DB for authentication. I've installed the Cisco VPN Client 4.0.3F on my PC. When I connect to the PIX a logon windows prompts for user id and password. W...

Hi All,I configured the LAN-to-LAN VPN between VPN concentrator 3005 and WatchGuard Firebox III/1000.The VPN connection is OK and came up. But I am not able to ping other end and vice versa. There is no filtering at all.The log shows that the both th...

Friends have given me a soho97 but I have an adsl with payment to time. I am an inexperienced person of nets and apparatuses cisco, but using the CRWS I have succeeded in connecting me to internet. With this configuration the connection ADSL is alw...

Hi,I have a pix configured with a site to site vpn. The pix has a 10 user license and there are only 5 users on site.The pix is running out of licenses, I do a show local-host and get:Interface inside: 10 active, 10 maximum active, 2781 deniedIt look...

I'm using the latest Mac OS X VPN client v4.6.0045 with 10.3.7 OS. I VPN into a Cisco 3005 concentrator runnning 4.1.7 IOS. When connecting with a Windows client my system DNS entries are updated to use the new DNS servers in the VPN environment. Usi...

Hello,My company have 2 branches which are using Linksys Router BEFSX41 and headquarter is using Router D-Link 804HV.These three offices link together by vpn connection.I plan to replace D-Link Router 804HV at headoffice by using Pix firewall 515e.I ...

Hi,Does anyone know a goof remote power control hardware so that I can do a remote power reboot or power on/off over telnet or web interface?Thank you.Regards,Ron

Hello Guys , Can you please let me know what is the theoritical bandwidth over head when we use IPsec encryption in respect with simple GRE Tunnel . Waiting for your expert comments.Regards,Max