VPN

Hi, I have a VPN between three sites, in each site I have a Cisco 831 that establish a VPN tunnel with a VRF (on my ISP) then I have a clear channel in the Headquarter to my ISP, the problem I have is that I have to manually modify the MTU size from ...

I'm having some issues with some VPN clients to a PIX firewall. The PIX is on 6.3(3) code and the clients are running v4.I have one remote user in particular who has two machines that he connects to the PIX simultaneously. One needs a specific IP s...

Hawe any one ever use this product?http://www.stbernard.com/products/iprism/products_iprism.aspPlease give me some comments. My boos is looking forward to buy it. They siad the product is CiscoAVVID Partner, but how good is it?

We just purchase Cisco VPN and it is Cisco VPN 3005 Concentrator Version 4.1.5 Rel Jun 18, 2004 This was the log file from Client:************************************************************************Cisco Systems VPN Client Version 4.0.4 (Rel)Copy...

Hello,I am a firewall newbie and I have a 515e firewall running pix 6.3(3) but am having some issues with traffic on VPN connections.I can establish a connection (using cisco vpn client)and have set the firewall to allocate a 192.168.4.x address. i c...

Can anyone point me in the proper direction to configure and install the certificates from a Microsoft CA server to a VPN 3030 and 3060. Also, can you tell me if I can do this with the client as well?Thank you,Dwane

Has anybody had any issues with a PIX 515e VPN whereby any NT 4.0 (SP6), 2000 and XP computers can connect fine with a Cisco VPN Client, but any Windows 95, 98 or ME computers receive a "Error 412 - Remote Peer is no longer responding"? The Client I...

I have one router interface fe0/0 which is public IP and have Internet connectivity. There is also GRE tunnel ( over IPSec ) is being terminated on this interface. I also have two access lists, one applied to GRE tunnel interface in bound and one app...

On a PIX running NAT can I have to static mappings which map two seperate outside ip addresses to a single inside ip address? If I do have this already will it cause any conflicts?

when I finish the webvpn configuration in vpn concentrator 3030, I try https://ip address, the brower webpage ask me to "Please enter you username and password", but I do not know how to configure the account in vpn concentrator? any suggestion?

Hi All,I have a strange issue and I dont know why....I have vpn client 4.x and i'm connecting to a Cisco Router 836. Authentication is OK, the ipsec tunnel is up, I can ping very erver in the subnet behind the 836, but not E0. I cannot access Interne...

We have a customer w/ a PIX FW that needs to connect to my network. We use Checkpoint and have sent the customer a sercure remote VPN package for his host. When he NATs the source address of the host behind the PIX, he can authenticate to the FW, but...

I have a simple VPDN setup on a remote Pix, the problem I am encountering is this -If I run the VPN client from a laptop that is connected on my local LAN, I get connected to the remote Pix via the client but can not seem to ping anything on the remo...

what are the exact requirements for Ipsec vpn over Adsl line by using Cisco Router Is it possible to fix 1701 adsl in the central and 837 at the branches

Pretty basic problem, but I've not played with ACS on UNIX before and need some pointers of where I should start looking.Basically have Cisco switches and routers confiugured with the tacacs-server key. The key is configured the same on the server, b...