VPN

I had looked at Cisco remote access solutions with the 7120 running PPTP and the 3003 about 4 years ago. Then the cisco client didn't receive group policies, etc and couldn't do anything with AD. This created problems in that remote laptops didn't ...

Hi,Is there anyone who can help me? I have a problem connecting with a vpn client 4.0.3 to a 3005 concentrator. Every time I try to connect the client stops with the: Remote peer no longer responding message. When I look in the event log of the conce...

Anyone running the above linux vpn client on a 2.4 kernel , when running via this cli I get the following below error message:./vpnclient connect sample.pcf user test pwd testInitializing the VPN connection.Secure VPN Connection terminated locally by...

Folks, In addition this command i have an access-list applied to the outbound interface inbound which permits icmp, ssh. When i VPN to the Pix, the tunnel is established, but, i can not sent traffic across the network behind the Pix. I see the p...

I am running a VPN 3015 connectrator with software rev. 4.0.3. All of our clients are running 4.0.3.A and all high speed connections (Dsl, cable) are having no problems. However dial-up ISP users are having random issues. In the most part dial-up ...

I have a pix with vpn. I can get connections but when one client connects I see no traffic flow on the pix with the "show crypto ipsec sa" command. At the client site they are using nat overload.Should that matter? They do not have a fire wall and no...

Previously, on client 3.X, Certificate Manager was separated from VPN Dialer.Then, by removing Cert Manager program, it was possible to disallow certificate moving from a PC to another one, if this function is reserved to admins.But in 4.0.X, all is ...

Hi.I am trying to raise a VPN between a Network Contivity appliance and Cisco PIX Firewall with digital certificates and not with preshared key, but the VPN does not rise. We have followed the steps for the configuration of VPN with digital certifica...

Hello,I would like to hear a suggestion about implementation of VPNC into network with PIX and RAS for connecting Internet and RAS users over IPSEC which terminating on VPNC.We are having PIX with outside connection to Internet and RAS router on one ...

Folks, We want to implement network level security within our Lan environment. I have been looking at different technologies Cisco has to offer. here are my thoughts. What i am looking for is security at the network level, that means when a us...

Hi All,When I study the documents for IPv6 security, The documents said that the IPSec for IPv6 is implemented through OSPFv6. But that just for OSPFv6 neighbor authentication, not for the data in IPv6 packet. Does anybody have idea?Thank You!Best Re...

Thought I would share an experience with everyone...All laptops on the network have the Cisco VPN client installed, as most take their laptops on the road or home when they leave at night.One thing I've noticed when performing vulnerability assessmen...

I'm implementing VPN network between routers for one customer (hub-sopke configuration). He wants to have preshared keys which are automatically generated. What that really means??I searched the Cisco web, and only find that this is mentioned in docu...

I am setting up a proxy server to filter web traffic. I have added an access-group on the pix to control access on the inside interface. Here is what I have added: access-list acl_in permit tcp host MyProxyserverIPaddress any eq httpaccess-list acl_i...

Hi guys,I have a little problem my VPN configuration. I have 4 sites, one is the headquaters and the others are the remote sites. So, I try to make 3 site-to-site VPN connections, one for each remote sites. I have 7120 cisco router on the HQ and thre...