I was wondering if any of these features are interoperable with other vendors?1. crypto dynamic-map2. DMVPNThanks,Greg
I was wondering if any of these features are interoperable with other vendors?1. crypto dynamic-map2. DMVPNThanks,Greg
I am trying to move my public interface connection from one ISP to another. Circuits, routers, connectivity is all tested out and working fine. I think all I have to change on the concentrator is the IP address of the interface and the default gatewa...
Does any of Cisco VPN Concentrator equipment that will work in conjunction with a Nortel contivity 1700?Thanks
I have a strange site-to-site VPN scenario between two PIX firewalls.PC--PIX506---CORELAN----PIX515---Router-----FRCLOUD My customer has a PC (far left) that needs secure VPN access to the FR cloud. This PC is sitting behind the PIX 506 a...
Does the private interface network address of the vpn concentrator have to be included in the local network list. I have just one server to be accessed via a tunnel and i just want to put this in the network list. It is on a separate DMZ to the priva...
I have a PIX520 that is giving me this error repeatedly:403102: PPP virtual interface 1 rcvd pkt with invalid protocol: b1, reason: unkown or unsupported protocolwhen I connect a PPTP VPN connection, it will connect but will not pass any traffic. It...
Hi, I'm trying to connect with a vpn client 4.0.2 that is behind an 837 adsl router. Althouh the ipsec connections gets stablished, there's no routing between the vpn client and the ipsec peer network.Diagram:VPN CLIENT=192.168.127.XADSL ROUTER=192.1...
Other than SSL, what ports are required to be opened on a pix to allow ssl and vpn tunnel traffic to pass/return to a natted vpn concentrator(3005) behind it? Latest and greatest IOS all around.Patrick
I am running IOS 12.3(1) on a 7200 and have configured it for VPN access. I'm using Cisco's VPN client. Am wondering if anyone else has seen the following problem and if there is a fix.The outside interface has the usual access-list applied that bl...
Is it possible to send traffic from Cisco VPN clients to the Internet through the PIX firewall? I don't want to use split tunneling.This is what is logged in the PIX:106011: Deny inbound (No xlate) tcp src outside:x.x.x.x/3048 dst outside:y.y.y.y/23x...
Dear All,I am trying to terminate a vpn-client on my 831 router using digital certificates. Are there any examples for 831 and the vpn-client? I only can finde papers for the pix. After the client choose the attributes I get an error:1:19:45: ISAKMP:...
Hi all,I make a VPN from a client to a PIX 525 with 3 interfaces (3 LAN: 192.168.1.0, 192.168.2.0, 192.168.3.0) from LAN 192.168.1.0 and receive an address 10.1.1.x from pool: how can I access in secure mode to 192.168.2.0 and 192.168.3.0, and be...
Hi, We need to setup a VPN between a Cisco 1710 (IOS 12.2(13)T5)router as the hub router and an Alcatel OmniPCX Office (release 1.1) as a remote office. By now we're getting many ISAKMP SAs established but IPSEC phase is not even initiated. Here a...
I know in order to enable local LAN access for Cisco VPN client, you need to tick the option of "allow local LAN access" under Cisco VPN client properties and do some configuration at PIX. My question is how to configure the PIX?Thanks.
Has anyone had any success in running Reflections X with the Cisco VPN?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-17-2024 06:49 AM | ||
04-16-2024 07:12 AM | ||
04-14-2024 06:53 AM | ||
04-03-2024 04:45 AM | ||
03-27-2024 07:28 AM |
User | Count |
---|---|
7 | |
4 | |
1 | |
1 | |
1 |