I run data and voice on my IPSec based VPN and I am going to apply QoS to my IPSec connections but I am worried packets arriving out of order on the other end. How sensitive is IPSec to out-of-order packets?Thanks,Diego
A customer needs a VPN connection between his 4 remote sites (2 E1s for two of them and 1E1 for the others).I am proposing a 7204VXR400/VPNK9 7204VXR VPN Bundle NPE400,128MB, I/O 2FE, VAM,IPSEC 3DES IOS for central site and 3745s for branch offices. ...
Hi,Somebody saw this message?Cisco Systems VPN Client Version 4.0.2 (D)Copyright (C) 1998-2003 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 5.0.21951 10:06:43.696 09/19/03 Sev=Info/4 CM/0x63100002Begin conn...
Hi,The problem is that the VIPs processes the packets locally on the VIP processor. The crypto engine only runs on the RSP. There is no way for the 2 processors to talk.How do I disablea VIP2-40 or 50, disable the VIP?I tried this command:7500-gw(con...
Hello,we have a cisco 3000 vpn concentrator. What we want to do is to connect a windows client over VPN to the concentrator and then to log on to our NT4 domain.I could establish the vpn connection to the concentrator but I did not get a domain login...
Hi,I have a client that has a PIX 515E at the HQ of the company and 2 PIX 501s at remote sites. As of today the 2 remote PIXs have a site-site VPN connection with the HQ PIX.My question is.... is it possible to have the HQ PIX act as a VPN "hub" for ...
Some of my users are seeing the following message when they try to connect to the Cisco 3005. "Remote peer terminated connection". They were working fine , this started happening suddenly. In the client logs i see the following "Phase 2 exchange time...
Has anyone seen problems when using ver 4.01 of the VPN Client with a PIX? IN several instances we have seen problems where, once connected to the PIX via a VPN, a user can ping a host IP address on the internal LAN, but cannot map a network drive, ...
Hello,currently we are investigating in our company which personal firewall to use on our mobile clients. Some of our mobile users (the number is increasing) have the Cisco VPN Client to connect to our VPN 3000 concentrator, but most of them use the ...
We upgraded to verion vpn3000-4.0.1.C-k9.bin on our conentrator 3030 3 weeks ago and on 9/12 & 9/15 our concentrator has stopped passing traffic to Lan's and clients. We do not see any errors on the logs and it's not affecting every client or Lan. Th...
I have just configured a PIX Firewall 501 (using PAT) to allow internal PCs using Windows PPTP connect to a remote PIX successfully (need to open port 1723). Is there any setting/port that I must configure for Cisco VPN client in order for IPSec VPN ...
Hi,Does anyone know how to accomplish this? I've got three sites with 1720 ADSL/IPSEC (IOS 12.2) bundles and additional ISDN WICs fitted. We can get the ADSL to form a site to site VPN easily, but how to get point to point to allow for ISDN backup?Ho...
I want config my cisco7400 router with vpn server,and my clients software are cisco vpn client 3.6.But i cann't type "crypto isakmp client configuration group"command.The 7400 ios is "c7400-ik9s-mz.122-9.YE.bin".Can anybody tell me why ?and how to so...
Hi,I need to connect multiple dynamic IP routers tothe static one using IPSec, cannot use DMVPN, need to do it manually, even if the trafficshould go thru the HUB.Read lots of samples but they show only static IPclients.Cannot use EasyVPN also.Please...
Hi, I have a PIX515e running 6.3(1) / PDM 3.0configured as follows PAT for general Internet connection VPN for remote access Site-to-Site VPNI've been asked to add an additional Site to SiteVPN link but with outbound NAT.Looking through the ...
