VPN

Can a Cisco VPN client be made to work through a shared connection using W2k Server RRAS NAT?I had something similar working when the shared connection was created using ICS on a W2K Pro machine and a dial-up modem connection. Now I've upgraded to IS...

Hi,I have a 2621 router currently being used to provide internet connectivity to 5 PCs. I am using a ethernet WIC for adsl with my ISP. My clients want to use the Nortel VPN client to connect via VPN. The router is currently configured to use NAT...

to all,i have a 2611 setup to be a vpn concentrator as well as other things. as it is now, i can vpn in fine, authenticate fine and get on the network. however once on the network, i can only ping one IP address, (unless clear ip nat trans *)or(wait ...

Trying to connect to our VPN concentrator and I get this error. I just started configuring our concentrator not sure if I did it right.1 10/19/2002 14:22:50.400 SEV=5 IKEDBG/64 RPT=55 64.173.199.201 IKE Peer included IKE fragmentation capability flag...

Have a 2600 with AIM-VPN. Never seen an AIM-VPN before. What is it? IS there any special IPSec configuration since I have it or do I go about my ISAKMP and Crpto-ipsec policy stuff as usual? Need a solid link or information on how to configure IP...

How do I set up local LAN Access for the VPN Client on the Pix. In the VPN Client Admin Guide Rel. 3.6 only the VPN 3000 Concentrator is described.Thanks.

i used vpn clinet 3.5 connect from inside our PIX to outside(Internet Network) , if the client have map static public ip on pix , the client can connect properly , If the client through pix with Pat, the client couldn't connect normally , Is true?...

HI In my network setup i have a using VPDN for my dial up clients ...is this secure enough ???and am willing to go for IPSEC on my PIX which until now has VPDN GROUP commands...so how can i migrate from the normal VPDN to IPSEC.???? is there any l...

Hi,I have set up a VPN using a PIX 515E and it all works fine. What I am finding is that the users can make a connection to a share on one of my servers, but they are having to supply user name and password for that resource. As they are being seen a...

I have a PIX 506E and a Cisco 3002 running an IPsec tunnel. Everything is configured and the connection works fine, except... when I telnet from the remote (3002) end to the RS/6000 at the PIX end I often lose link when idle for a period of time. I...

I'm setting up a 3030 running 3.6.1 OS and I'm having a problem with the connection. I have a PC setup on the same segment as the Public interface and I can login, authenticate (locally), and receive and IP address from the concentrator. The issue ...

Hello,We have nex problem on AS5850with IOS 12.2(2) XB3 TACACS+ not generate task_id (it is balnk). Consequence of it is broken billing.with last IOS 12.2(2) XB7 & 12.2(11) T TACACS+ work up only four high bytes of task_id. Example: task with nu...

Does anyone know what the maximum IPSec 3DES throughput of the Cisco 828 SHDSL router is ? We are looking at using this router to connect a branch office to a company headquarters using a VPN across the Internet. The branch office will utilise a 512/...

Dear All,I have a problem on a VPN network, I have a VPN 3015 and users using the VPN client. ( both is version 3.6).The problem is that some 10-20 users losing there conection after a while and need to reconect. The log information on the client is:...