I have a router at Main Office of model: Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2) which i am trying to create a VPN to a remote site with the following verison" Cisco IOS XE Software, Versio...
Forum Posts
Hi,I have to establish a tunnel from the local FW to a remote FW in L2LIn case of failure of the remote FW, a tunnel has to be opened with the backup remote FW.I have proposed to use IKEv2But with following config i get the message: %ASA-4-752009: IK...
Hello,as described in the Titel a want to connect with AnyConnect Secure Mobility Client 3.0.2052 to ASA 5540 Version 8.4 and SSL Premium License.The clients using Maschine Certificate to authenticate to ASA. This works fine.Now I want to setup a DAP...
Resolved! Static route over IPSec Tunnel
Hi, I need to reach a secondary router internal subnet which is at the end of an ASA ipsec tunnel (see attached)For clients on Router A (172.16.2.1/24) to reach clients on Router B (172.16.1.1/24), would it just be a case of entering a static route e...
Good morning, I am looking to create a VPN from an FTDv inside our transit VPC to another VPC using the VGW, but im running into some configuration issues:1. the IP address scheme provided by AWS after I create the VPN uses the 169.254.x.x address ra...
Hello: I have the above mentioned router and am attempting to configure it to bring up an L2TP/IPSec connection with a windows client.It completes phase 1 fine but fails the phase 2 negotiation stating the transforms don't match but it seems that the...
I have VPN Remote Access setup and working on our Firepower 4110, version 6.2.3.3 but I am now trying to install an SSL certificate for this Remote Access setup so that my users do not get SSL errors when trying to connect and use the AnyConnect clie...
I am using the Cisco AnyConnect VPN client on Windows 7 (I know, shame on me) to connect to my company's network remotely.It works well in most regards. However, I have noticed that it is seemingly impossible to stop it from automatically starting up...
Hello, I didn't find any answer to my question, so I need to post this here. On my client Anyconnect is starting with autostart, also the Anyconnect Client starts VPN when Anyconnect is started. I know that i can disable this feature with unchecking ...
Does anyone know how to change the DNS search entries so that it uses the Cisco Anyconnect DNS first when Cisco Anyconnect is connected? We're having some issues resolving DNS.Below is the output from scutil:> list ".*DNS" subKey [0] = Setup:/Networ...
Does anyone know how to configure the DNS servers for Cisco Anyconnect so that it will work for Mac laptop? The dns servers configured for the group policy doesn't seem to work for Mac laptops. It will still use the local DNS servers instead. For W...
Hi,I have two sites "Local site" and "Remote site", running a route based vpn tunnel between them.At the remote site there is a print server that needs to communicate with printers in the 192.168.50.0/24 network.The print server connects to the print...
Resolved! AnyConnect not using IPsec
Hi, I'm using AnyConnect 4.9 on an FTD 2120 via FMC. I have enabled IPsec ikev2 and the associated policies however when I connect to the VPN i can see the method was SSL not IPsec, does anyone have any ideas as to why its not using IPsec? -Cheers,C...
I generated a certificate from a Linux and import to my CSR1000v, used for AnyconnectVPN.I am doing that because a bug about self-sign certificated, and I am doing the workaround #3.https://www.cisco.com/c/en/us/support/docs/field-notices/704/fn70489...
i am using any connect vpn for cisco and it shows mr erre that failed to get configuration from secure gateway , i have check anyconnect connections profiles and make sure that profile is created with group policy (GroupPolicy_AnyConnect-VPN ) with A...
