VPN

When I installed the VPN Client 3.5.1.Rel-9 on Windows XP ProI can no longer switch users (Fast User Switching) without first having to log off. This client is for home use and I have a number of people who like the XP ability to switch users (Fast...

I think this is something that should be able to be done, but I want to verify it before we make the final cutover. I have several ipsec vpns going from my router to other routers/firewalls on the internet. This was/is fine going out a single inter...

User has a NT4 server set up as a RAS server using PPTP to connect remote users. The Cisco 678 is set up with NAT, Static IP range setup as VIP0 for any static IP addresses used for servers internally, filters set to allow certain services to pass th...

I have a VPN connections coming into the Cisco 1605 router. But the remote VPN client is using any ISP and the VPN clients have the DHCP address of the ISP. And different ISP have different Ip addresses. Therefore the IP addresses coming into my cisc...

Trying to install VPN Client on Windows XP, get the following message: "Cisco Systems VPN client is not compatible with Microsoft's Internet Connection Sharing for Windows XP. Internet Sharing Connection must be uninstalled before the VPN Client can...

Greetings...My corporate office runs on a PIX 515. For many months I have been running my Cisco VPN Client version 3.5 to my corporate office, from home, on a DSL router, successfully. Yesterday, I installed a PIX 501 on my home DSL line and now I'...

Many of our telecommuters use a Lucent/Avaya product called IP Softphone. This software is a poor man's VoIP in that it allows for redirection of calls from the local office PBX to your home phone and allows you to dial-out from your house as if you...

I have a solution with a Cisco 2600 as Tunnel endpoint for users with Cisco secure VPN client 1.1. I'm facing a problem with IP pool: after about 2 months, the ip pool shows no free ip to allocate. I guess that some connections ends and release the a...

Hello;I have recently been tasked with setting up our VPN from remote/home users for my organization. What I have encountered is a problem with Windows ME. I can connect using CISCO VPN 3.1 and ME but the logon to the network challenge is missing the...

I have w2k pro.. have a pix 506 firewall with 6.0+ image.. i've tried client 3.5, wont work.. tried a 3des vpn3000 client.. worked great with win98.. but wont work with w2k pro.. anyone got suggestions on what i need to use.. plus.. where can i get i...

Can I setup the VPN client at our location on a cisco 1700 router? And how will this affect our WAN?

I have been provided with an ADSL connection to the internet. My company has had a Cisco 3600 router installed with a Radius router connected to the internet. I have just an ADSL modem and a win2k PC at home. To access the the VPN I have been told to...

I have configured a PIX 515 (6.1) with remote access VPN (PPTP at the moment)with ACS 2.6 (RADIUS) authentication.I'm using a PIX local pool:"vpdn group 1 client configuration address local poolvpn"but i need to release a static IP address from ACS u...

If a Firewall is connected directly to the edge of a VPN network (ie. to an ethernet port on a 7200 that has vrf forwarding enabled) should the FW be able to setup an IPsec VPN across the MPLS network and out the other side to another IPsec VPN devic...

Hi all,Can someone privide a basic config required to make a 3620 a VPN choke router? I have a 7200 sitting behind it and want to only allow IPSec through.Thanks in advance,Best Regards,Jerry Roy