VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

We are wanting to setup VPN capabilities for Remote Dialup clients (via Internet, on Notebooks running Win2k Pro). The plan is to use a Win2000 Server running Routing & Remote Access that resides on a DMZ behind our PIX Firewall (old 10000 series ru...

jjporche by Level 1
  • 456 Views
  • 1 replies
  • 0 Helpful votes

I´ve created a VPN between two routers:> 1- 1720 with ios: aaa1384.bin> 2- 801 with ios: c800-k2osy6-mw.121-3.XG5> > The VPN between the routers is through two ISDN, and our problem consist in the lost of the VPN after a few time it has been created,...

icalvo by Level 1
  • 457 Views
  • 1 replies
  • 0 Helpful votes

We have a client using the VPN software client creating a tunnel with our concentrator. Our internal app then starts a telnet session on a specific TCP port and streams data. It works for a short period, hangs, then tries to start another session. ...

rimbertr by Level 1
  • 446 Views
  • 1 replies
  • 0 Helpful votes

So, is everyones solution use Concentrator 3.02?What are some other solutions? Please help me out with this before we deploy XP system wide in a couple days.

jlashmet by Level 1
  • 368 Views
  • 1 replies
  • 0 Helpful votes

vpn

proper procedure for adding route-map nonat permit 10 statement, everytime I add this statement I loose connection.

gmckinney by Level 1
  • 388 Views
  • 1 replies
  • 0 Helpful votes

hi,we have finished a setup of 3com Total Controls as a LAC and a cisco 7206 as an LNS, the problem is with ppp connections, when the user connects , the connectivity stays for 2 minutes, and it is lost, it doesn't disconnect but, I'm no longer able ...

sys by Level 1
  • 453 Views
  • 1 replies
  • 0 Helpful votes

I have the following problem:we wont to build an VPN with Cisco 2651 Router and IPSec Software into the headquarter and 2621 Router with the same Software on the other sites.We have an 128 kb leased line with an static IP Address in the headqurter an...

Hello community! I’ve the following network configuration: 2 ISP Router, 2 VPN concentrators 30xx and 2 edge router to my LAN. From the WAN side (Remote offices) there are VPN tunnels realized with PIXs in every remote office. I created a redundant c...

bogdahnt by Level 1
  • 370 Views
  • 1 replies
  • 0 Helpful votes

Hi, I am trying to establish L2TP tunnel using IPSec. I have configured Cisco 3600 as LAC and also with the required IPSec configurations. When I try to establish L2TP tunnel using a PPP client connected to the LAC, the IPSec SA gets established pro...

awank by Level 1
  • 490 Views
  • 1 replies
  • 0 Helpful votes

How would you go about capturing syslog messages from a branch PIX (pix 506) which has a site-to-site VPN connection to our corporate office running a pix 515UR? I believe I can have the 506 send the syslog messages in the clear through the net, but...

mgeneral by Level 1
  • 477 Views
  • 2 replies
  • 0 Helpful votes