VPN

I have 2 routers Cisco 1401 which are connected to the ISP Wanadoo. The connection to Internet is OK.I had configured IPSec 56 in tunnel mode on thise routers to connect 2 private network. I have the following problem: the ping between the 2 private ...

Hello,i want to plan a hub and spoke VPN from 9 locations to a central one. (i want to use pix506 on each loaction)The central one has a Firewall-I already.Can PIX connect IPSEC against Firewall-I..??If not i would plan a VPN3000 system there maybe o...

Hi, I'm new to the VPN game, please have patience with a newbie.I need to setup a simple VPN with 1 or 2 remote users.I don't need to much security, a simple user name and password would be adequate. Don't want certificates or the like.I don't want ...

Should we increase MTU of Packet if we deploy VPN on MPLS network on Cisco 3600 series configures as PE-to-PE, above 1500 bytes due to additional tag on IP header ????

We are planning to implement a PIX 515, creating a VPN to a client site (with a 1722 router on the client end). We will also be using an ethernet interface on the PIX to connect a DMZ. My question is: can we also implement a VPN between internal mach...

I have two 7140's running BGP and they are going to two different ISP's. The two 7140's are connected together via ethernet on the inside network. One of these 7140's does VPN terminations on the serial interface (going to ISP). Depending on what ...

I have PIX 515, 5.2(3), using VPN client 3000 2.5 2(A). dong IPSEC with 56bit DES. I am having problem with my clients VPN connection dropping after some time it is very frequently. What can cause this, any trouble shooting help will be greatThanks

What are the restriction(s) to use NAT and IPsec ?

Hello,How can i do if i want to connect two sites (over INTERNET) with VPN AND access INTERNET with the same serial interface because one traffic is encrypted and the other not ?How can i do to separate the traffic in this case ?Have a example of con...

our company currently has an existing firewall and I'm trying to add a VPN concentrator device in our network. I know I could either place the Concentrator parallel to the firewall or place it on the DMZ. I would like to know how you guys are impleme...

Hello,I'm very new to VPN and I was wondering if somebody could help me find a solution for setting up a VPN connection between a business partner and just ONE machine located on our internal LAN. Currently I am using Microsoft's PPTP on an NT Serve...

I have a customer who would like to know how manyVPNS or vrfs can be supported on a 7200/7500/GSR?They would to scale these platforms and are trying to understand the limitations for growth.

using router-on-a-stick topology, I am setting up a site-to-site vpn between UK and USA. The tunnel is up and HTTP and FTP traffic is going through the tunnel. I have the LMHOSTS and HOSTS file setup correctly but I am not able to see computers and/o...

We have a small LAN with a dedicated ISDN line to the internet. We host our webpage, Exchange server and take on orders over the net. We have sales people in various parts of the country and need to gain access to our resources on the NT server. C...

When you connect two Routers with VPN , and between these two routers, you have INTERNET, what are the actions to do for the provider (ISP) ?We want use a Frame-Relay connexion between our router and the ISP.Thanks for your answers.