VPN

I would like to implement VPN between two sites. One site is running with Pix 520 and the second site is running with Cisco 3640 (IOS 12.0(7)).IPsec is configured on PIX with a per shared key mechanishm. What need to be done to implement site to site...

Hello,XAuth is available in Cisco VPN Client and VPN 3000 Client (Altiga).Did anybody knows if it's possible to configure XAuth with PIX and W2K IPSec Client?Best Regards,Claudiu

I have set up a VPN tunnel, using IPSEC, between 2 sites using the Internet as the backbone. I am using a Cisco 7200 and Cisco 3640 to form the VPN tunnel.Questions:1.Is it possible to restrict the number of users using this VPN tunnel to access the ...

We are currently testing IPSEC and GRE tunnels successfully. I am using CAR, for example, to give a particular tunnel a guaranteed 128K out of the serial interface into the ISP. Is it possible to use CBWFQ on traffic within a GRE tunnel? as you can...

Well I have the same task to implement a VPN, what i design was using a 3620 connected to the outside interface to PIX 515 whose inside interface is connected to the backbone switch. Now my remote clients will be runniing VPN client software. Right n...

I was curious whether anyone out there had found a way to monitor traffic utilization going through the IPSec tunnels configured on their boxen. I have a need to report traffic utilization and type (i.e. http, smtp, ftp, etc.) to upper management.As ...

i want to know a basic information about seting up VPN using cisco 1720 and how can make LAN-to-LAN connection using VPN , the basic command .

Anyone have experience with VPNS between Ravlin products and Cisco (PIX)?

Hi everybody,I want to build a VPN between two sites, they are using two IOS router ( 2610 ) connected to Internet using a leased line both are equipped actually with IOS Firewall, with also an inbound access-list and CBAC. The access-list deny anyth...

We have a Cisco Pix firewall and we also need to setup a VPN for remote access for both employees and clients.How do you determine whether it is better to use the PIX we have for the VPN or purchase a seperate piece of hardware like the VPN 3000?

Hello: We currently have a PIX Box. Our network is set up so that the PIX is the default gateway. When I add the Cisco 3015 I will put one interface on the inside (parallel to the PIX) and one interface on the outside (parallel to the PIX on the ou...

Has anyone implemented or evaluated an end to end VPN solution?I am looking for specifics regarding ability to handle remote employees, remote customers and site-to-site VPN design. I need to also manage the environment (user manangement, access con...

We currently have a VPN solution in place which uses a VPN 3000 Concentrator, and CiscoSecure 2.4 Radius authentication. We have "internal" groups defined in the Concentrator with access-controls also defined for those groups. We have authenticatio...

I have a question... if I make a VPN between differet offices that don't have the same Internet provider can I use te PPTP? Cause I know that many I-providers use the same IP address for more then one user.

I need some help (scripts, samples, tech info) with VPN configuration for Cisco 3662 router and 2610.Currently we have four locations, all of them connected to the internet. I would like to VPN all the locations (between one and the other) and leav t...