VPN

The built in windows supplicant has no issues blocking access to unauthenticated networks however I can not get NAM to do the same! Users will not be able to add or modify networks in the NAM client so i have set up the only profile to be an authenti...

Hi,We have ASA 5516-x firewalls deployed, and we are planning to provide AnyConnect VPN access to more employees but we are not sure about the right license to purchase to achieve our goal. The current licensed features of the firewalls are: Maximum ...

Hello dear CISCO community !  I need some help regarding FlexVPN configuration. I have a "central" router used as a VPN concentrator for several IR829 routers (4G mobile routers). Those routers use rsa-sig authentication on their ikev2 profile. The c...

Hi, With AnyConnect 4.7, is it possible to apply an equivalent of the always on VPN “connection fail closed” policy to a Management Tunnel / User tunnel setup? I’ve been testing the new mgmt tunnel feature, and have found that in a captive portal neg...

So I have a subnet/object  let's say:obj_10.10.10.0 255.255.255.0nat (any,outside) dynamic interface Seems having issue from Outside accessing it.My ACL for Outside permits the the source to the obj_10.10.10.0Packet-tracer is failing at "RPF-CHeck Ac...

I have 1 ASA in the main office with 2 internet connections, and a remote site with a 4G modem connection. We need to connect the branch to the main office but the VPN is not coming UP. Here is the configuration of the branch ASA access-list Wifi_acc...

hello there hoping you can help. We run a mix of win 7 & 10 ENT 64bit computers and use the anyconnect-win-4.1.08005 vpn client. Recently we moved from Symantec endpoint protection to Trend OfficeScan XG but have found that any computer that has Tren...

There is a fairly major bug in AnyConnect 4.7.00136 regarding the tunnel MTU. If DTLS is enabled, it will send packets that are too big and many applications break.  Ignoring the df-bit and/or specifying a low MTU doesn't workaround the issue. Disabl...

My network engineer did a security update on my Cisco ASA 5506 After the update, I was unable to connect to the ASA I received this message  Could not connect to the server. Please verify the internet connection and server address. I added https:// i...

Is it possible to use vpn filters with object service groups? I cannot see to get this to work? I dont see much out there on "groups" just individual ports.  If you can do this what is the syntax?