VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hello-   I am working on redesigning OOB access. Currently in our datacenters we have old routers setup as reverse telnet with analog line 20 nodes connected to the reverse telnet router.  during a discussion it was mentioned that reverse telnet is a...

PLC by Level 1
  • 1229 Views
  • 2 replies
  • 0 Helpful votes

Hello friends! I´ve been trying to configure anyconnect VPN, but I cant generate the CA, probably I´m doing sothing wrong. To be honest, I don´t know if the the problem int this VPN is only CA that is missing, but is the only thing that I saw that ca...

Hi all,   I have one ISAKMP policy on my router without DPD and need to add second one with DPD. DPD configuration will be: crypto isakmp keepalive 10 periodic So if I add that configuration, will it affect to first policy ? I want to configure DPD o...

I have a 5506-X connected to a switch, connected to a router. There’s only one public IP address, which is on the router, and the router is handling the NAT. The ASA is forwarding traffic without the use of NAT. There is a NAT statement in the router...

Hello.    I need to implement a VPN using IPsec ESP protocol in tunnel mode and the VPN clients must get an IP from the IPsec server. I was watching videos regarding the configuration of it and all implement a DHCP with another subnet for the VPN cli...

Hello,   I got a few requests from the customer and i also thought that these are impossible to be done. But I just want to get confirmations from the experts staying here :) 1. Per user based the firewall feature : Client wants to apply the firewall...

SDKIM by Level 1
  • 1340 Views
  • 6 replies
  • 0 Helpful votes

Hi,I recently configured AnyConnect on ASA 5510, 5512 and 5505 with split-tunneling and it's working great. You can refer to the configuration below:webvpnenable outsideno anyconnect-essentialsanyconnect image disk0:/anyconnect-win-3.1.14018-k9.pkg 1...

Hello!   So I got tasked with a tricky assignment today...   We have an ASA with inside, outside and wifi interfaces (the other ones are not important). The outside has Public1 IP and the clients from the wifi interface are NATed to Public2 IP addres...

Hello Everyone,    I am having some trouble getting port forwarding to work. ASA 5505 CLI Version 8.2(5). I've tried a few different configs, but I can't seem to get it to work. I am trying to configured RDP access for one specific public IP only. Us...

JB-TX by Level 1
  • 2970 Views
  • 5 replies
  • 0 Helpful votes

I have been testing EasyVPN combined with IPSec VPN and there is an issue regarding the communication on VPN Tunnels which is summarized as follow:  * attach the configuration from Office Router and Diagram The communication through IPSec Tunnel is f...

EasyVPN.jpg

I am going to configure site to site vpn in my lab .. i am using two ASA what are the parameters to match betwween the peers phase 1 configuration .....crypto ikev1 policy 1 authentication pre-share encryption aes hash md5 group 2 lifetime 86400wheth...