VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Hi guys! I am currently using the Cisco Client VPN (In my Windows - Home Office),  configured on a router Cisco 2811 and IOS c2800nm-advipservicesk9-mz.124-3a.bin. However, when there is a drop in my internet, on the client side, when I return my t...

Hi,is it possible to use a Cisco router as a PPTP client?The problem: To get a fixed IP from an ISP in Asia we need to dial in via PPTP. The fixed IP gets assigned at the PPTP interface. Actually we have a PC connected and it works. I want now to rep...

vachadorf by Beginner
  • 889 Views
  • 2 replies
  • 0 Helpful votes

I configure cisco router as PPTP client. In router everything is ok            (ping 8.8.8.8 -----> Reply from 8.8.8.8: bytes=32 time=137ms TTL=42)ButI can not ping 8.8.8.8 from pc.    (ping 8.8.8.8 -----> Request timed out.) show interfaces dialer 0...

I have six remote sites that use vpn to connect to the main office.  I am getting complaints of slowness from each site.  When the vpn traffic gets to the main office, it using a wccp redirect to Cisco IronPort and then traffic goes to the servers.  ...

Hi All I am newbie in VPN, So need your advice, It will help me alot. Let me show you first license of my both firewall. In my network environment I am using two cisco asa 5525x and 5520. cisco asa 5525-X: Maximum Physical Interfaces : Unlimited p...

Hi All, im using ASA 9.1 version and have configured SSL vpn. After login to SSL Page, when i Click the bookmark it says server not unavailable. I am able to access the bookmark from within the LAN. The bookmark contains the url as https://192.x.x.x/...

secureIT by Enthusiast
  • 433 Views
  • 1 replies
  • 0 Helpful votes

I was just wondering if I can Configure IPsec Anti-Replay Window: Expanding and Disabling on a Crypto Map (on a spacfic crypto and to override the global rule) on  ASA Cisco Adaptive Security Appliance Software Version 9.5(1)

Hi All, I have a remote site ASA using a single ISP.  We have 2 active site to site tunnels, one to HQ and the other to our DR.  Is there a way to have both tunnels active but prefer the tunnel to HQ?  There is some overlap of network subnets on each...

wngwngwng by Beginner
  • 469 Views
  • 5 replies
  • 0 Helpful votes
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers