Hi all, Cannot get the the vpn ikev2 to authicate using certificates. Get the following debug (96): IKEv2-PROTO-5: (96): SM Trace-> SA: I_SPI=0EB92F8B306D2B27 R_SPI=2EE5B0F380F21D2D (R) MsgID = 00000000 CurState: INIT_DONE Event: EV_DONEIKEv2-...
Forum Posts
Resolved! install mapped drive
Hi All, I am trying to install anyconnect 4.4 in my customer premises. The customer has some mapped drives in his PC ( windows 7), which is being affected after the anyconnect install. Once I install anyconnect, the mapped drive comes with a cross ma...
I am new to Cisco. We are about to establish a natted VPN connection to a truck company who operates a bunch of these VPNs to their customers to download and upload confidential data via ftp (cannot be changed to anything else yet). I installed an AS...
Hi, every one I am configuring a router in order to allow remote access for nomade. My problem is that i cant't access the Lan here is my router configuration ROUTEUR_V#sh runBuilding configuration...Current configuration : 2619 bytes!version 15.3s...
I need to be able to monitor the HTTP traffic from our iPad app for debugging and troubleshooting purposes. I am able to do this using Fiddler on my desktop computer when the iPad is connected to our office WiFi and not connected to our corporate VP...
Hello,please, when you want to buy ASA5505, do you have to buy Sec.plus on your own, or is it included? (ASA5505 FirePOWER IPS, AVC, AMP, and URL 3YR Subs).And what about ASA5506? The same? (ASA5506 FirePOWER IPS, AVC, AMP, and URL 3YR Subs).Thanks f...
Hello, We are in the process of upgrading our Cisco ASA 5510 running 8.2(5)55 to a 5512 running 9.8(2) and are having some issues connecting to our remote access vpn with certain clients. The majority of our clients are running shrewsoft which is no...
Hello, I'm not sure if this is the right forum to ask this question but I wanted ask a question regarding AnyConnect VPN and Cisco ISE. Is it preferred to have AnyConnect VPN configured before, during, or after the Cisco ISE deployment? I'm curi...
Resolved! ASA 5505 VPN for Internet Traffic
Can someone assist with this scenario? I need to have ALL traffic (including Internet) route over a VPN BUT I need to exclude some specific traffic so it gets Natted locally. I've tried to do this by adding a n DENY on my ACL but can't seem to get it...
Hi, Been banging my head against the wall on this for a few days now :) IOS 8.2.5(i know) ASA 5505's on sites A and B are the edge WAN outside interfaces on both. I cannot get to site B lan from Anyconnect. The tunnels on the Site B-A include...
in my network, previously we were using 4 Cisco 6880 IA and we have assign proper FEX interface on these switches. Now we have removed one switch from there but in the configuration for 4thFEX is still there, i want to remove it but without switch re...
Dears, I have Firewall ASA 5555 in Site A with static IP address , at remote site site B I have 4G CPE with of course dynamic IP connected to Cisco Router ISR 4431 kindly find the drawing in the attachement network 10.213.20.0 /24 is in both site...
Resolved! Small Business Switch SG200-08
I have connected SG100-08 unmanaged switch to my core switch. I have done some port assignment for specific Vlans on this switch. I have connected one PC and printer on this switch and assign management IP instead of default IP to this switch. Ever...
Hi, Setup is: Location A ASA5505 Software Version 9.2(4)5 Inside 192.168.3.1 Outside 192.168.1.1 Location B ASA5505 Software Version 9.2(4)5 Inside 192.168.2.1 Outside 192.168.0.1 Both routers has access to the internet via another router (DMZ). ...
Hello, I have set up an L2PT/IPSEC tunnel using a router Cisco 1905, which is behind a FW Cisco ASA. This tunnel is to be established between the router and mobile devices, mainly iPhones and Androids. For the sake of troubleshooting, I made sure the...
| User | Count |
|---|---|
| 1 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
