VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Android Anyconnect certificate

Hi I am very new to this but unable to find the exact answer after much searching.  If you can post links to any official documentation that will be great.  Can I use internal/private MS certificate on the android device with anyconnect app on?  I ...

t231hot01 by Beginner
  • 632 Views
  • 1 replies
  • 0 Helpful votes

Resolved! IPSEC + GRE at Cisco 3925

Dear! When i start to upload/download data - tunnel goes down , when my speed more then 50 Mbps. Moreover, my Cisco 3925 goes to reboot and makes crashdump file after this (he is empty). This happens just when speed more then 50 Mbps. In other time -...

ASA 5520 VPN User Login History.

Hello.  We are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors.  Is there a way to view a history of VPN user logins?We used to have (or we still have but no longer using it) th CVPN 3005.  This device keeps ...

VPN Site to site ASA 5550 -> 5506-X - Problem

Hello everyone! I'm having some problems setting up a vpn tunnel between two cisco Asa's. The scenario is as follows One Asa 5506 (My side) and one 5550 (other side). Tunnel properties are as follows : Phase 1 Auth : Pre-shared key Encryp : Ike G...

dorcejose by Beginner
  • 444 Views
  • 2 replies
  • 0 Helpful votes

AnyConnect VPN

Hi Everyone, I'm having an issue with my anyconnect VPN set up. My ASA has multiple sub-interfaces for the different VLANs on my network. I'm able to establish a VPN connection with the anyconnect client and I can reach one of the vlans however I can...

Converting ASA 8.2 L2L VPN to 9.5

Hello, I'm in the process of replacing our ASA 5510 running 8.2 to a new 5516x running 9.5.  I have about 25 L2L IPSEC VPNs currently configured.  Instead of creating 25 "nat (inside,outside) lines for NAT exemptions, can I use object groups and a si...

bhogue by Beginner
  • 112 Views
  • 2 replies
  • 0 Helpful votes

Cisco 3850 and its security features!

Hello guys I hope you're having fun with networks:D We recently bought two cisco 3850-48P-E for our buildings as core device ( actually 4 X 3850 to keep redundancy as high as possible in core block). We're planning to connect buildings using UBNT rad...

IKEv1 and IKEv2 in the same crypto-map

I am interested the following:There is Cisco 2901 v 15.4.(3)M4.There are also some L2L IPSec peers. Some of them use IKEv2 and others use IKEv1. There is an external interface.Is it possible to configure crypto-map that contains of mixed IKEv2 and IS...

RYShibrik by Beginner
  • 1942 Views
  • 1 replies
  • 0 Helpful votes

Resolved! ASA vpn site-to-site isakmp question

Hello, it has been asked me to configure on ASA a new vpn site-to-site. For this vpn I should set : crypto isakmp identity address crypto isakmp enable outside .. from my configuration crypto isakmp identity is auto and crypto isakmp is not enabled o...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: