VPN

Is is possible to create an ACL (standard) and assign it to a particular VPN user? This way they will only have access to a few hosts on the network. I created an ACL and assigned it via the access-class as follows: username xxx access-class 10 passw...

Hi we  have implemented RA VPN with AnyConnect. The AnyConnect Software and Profile are deployed by SCCM on end users computers. Now we have a Word document, in layman language, that will tell the end users what to do in case they are unable to con...

Hi all, We have AnyConnect RA VPN with Certificate Authentication only. (No AAA,LDAP nothing) We want to allow only users who have certificates on smart card and that too from our own PKI Sub-CA. We have configured all this in the Client Profile. How...

Hi Guys See the debug below, any ideas why a Windows10 cleint cannot authenticate. L2TP with IPSec pre-share key. Cheers Mike *Nov  5 09:58:56.360: ISAKMP (0:0): received packet from 210.10.200.214 dport 500 sport 500 Global (N) NEW SA*Nov  5 0...

I have a site to site VPN that runs on  IPsecOverNatT(The external interface is NATTed on the router to a public IP),how do i disable this feature? I want to configure my external interface with a public IP and update it on the other side of the VPN....

We have a dmvpn hub in the states with 150 clients which are working well, but recently we installed a 881 in the UK that is giving me trouble.I'm able to get consistant pings from my dmvpn hub's outside address to the 881 dmvpn hub's outside address...

Dear All, I have been trying to create S2S IPsec tunnel between my head office which is running Cisco 2801 and the remote site has Cisco rv042 but unable to establish ipsec tunnel. Need help. Regards, Talha

The company I work for use cisco 2600 to give access to computer over a dial up connection, but the speed is too slow, what should I change to make it better? I think it's limited to 33kbps.

Hi Everyone, we are using always on functionality with TND using secure SSL Servers. I have following questions: 1. I can enter several URLs and the hashes get generates. Does AnyConnect try to connect to servers from top to bottom in the list. Tha...

Hi my friends, I had a problem with my VPN connection, this message appears. "Login denied. Your session has been terminated due to your machine's security posture". Thanks!

After Windows 10 Update KB4013429 on 3/14/17 VPN does not connect to Internet. I use Cisco Anyconnect version 3.1.05160. Once it connects, there is no internet connection - websites do not load in any browser. This was working properly prior to the u...

Hello, Everyone I'm running across an issue with my VPN connection between my peer and my end we are unable to ping each other private network addresses

hi, can anyone help me, im building a VPN  site to site between ASA and Meraki (dynamic crypto map), so te firewall is configured to wait for vpn request from everywhere, the vpn builds fine and I can have a ping from the branch (meraki site), but if...

Hi, I'm trying to set up a site to site vpn. Site A (local): 192.168.2.0/24, external IP 81.14.x.x. (CISCO ASA 5512) Site B (remote): 192.168.5.0/24, dynamic external IP IPsec Tunnel comes up nicely, data is transferred both ways. I can't ping all of...