VPN

Hello, I have a Cisco ASA that is being used to establish a VPN connection with a partner. In this specific case, the partner sends us a flow of data over the VPN connection, that we receive and send to out systems. The source application is unable ...

I have a couple of ASAs running 9.5(3)2 which have several WebVPN portal pages containing HTTPS link with smart tunnel enabled.  These work fine on Windows 7 systems, but I have yet to see it work on any Windows 10 system.  The Cisco SSL VPN Relay ag...

First off let me say that I am no Cisco expert.  That said we've had an issue here for a while, and I'm finally tired or the work-around to the issue.We have an ASA5510.  Our external employees connect via AnyConnect and VPN Client.  That all works f...

Hi All I currently have an AD account, that I don to want to delete. However I do not want it to connect to the firewall using its AD credentials like all other users. When it connect it authenticates using the Defaultgroup policy Is there a way on...

I have a site to site  VPN tunnel to customer. We are using cisco 7206 and customer side ASA is installed. Tunnel is up and working fine , it will only be coming up when customer initiate the traffic their side we are not able to do. Customer require...

I can't communicate with anything connected on the inside interface. See the attached command prompt ipconfig. I get an IP address and default gateway from the inside address pool of the ASA (100.100.100.240) but i can't communicate or ping anything ...

We are using posture thru DAP which work fine for Antivirus, Firewall, Registry check and so on. The hostscan package is installed on ASA. Question :  My understanding is that hostscan package is pushed automatically on workstation by ASA. Why we d...

Hi. For some reason, adding routes from command line while the VPN connection is active is deferred until it terminats. I just wonder how it's done: > route ADD 1.2.3.4 MASK 255.255.255.255 192.168.149.200 METRIC 1 OK! > route pr...

Hi all, I configured Anyconnect VPN on Cisco 1811 router. But, for some reason, I am unable to open the VPN webpage. It's comes up with 404 not found error. Below is the snippets of the config from the router: aaa authentication login ciscocp_vpn_xa...

Hello everyone, I am trying to figure out the following task, if anyone could help me that would be great. I neet to configure a vpn ipsec with gre between two routers. (R1 and R2). R2 has: statis public ip address. its on another site so i cant c...

Hello,Any guidance or help is appreciated.Looking at performing a File Host Scan/Check for MACs and have not seen any exemples for file path.Windows file check is easy and straightforward.In a MAC, let's say we create a text file and place that in th...

Here you can find all configuration steps:https://supportforums.cisco.com/document/13259276/configure-failover-site-site-ipsec-vti-tunnels-between-two-asa-971-using-cli

Hi All,From some prior posts on this support site, I see that people have used the CPS1610 successfully to manage serial console connections to their Cisco routing and switching hardware.I just wanted to confirm my understanding of how it integrates ...