VPN

I am trying to terminate 2 clients (2 different VRF's) on the same router.  Im having a couple of issues- How do you match each VPN connection (hostname?  user/fqdn?) without using an IP address because each one will have a dynamic IP address- not st...

On a Mac desktop with AnyConnect installed the user is not seeing the Group selection box. How do we get that to display in the AnyConnect client?

Hey guys, I'm super new - I completely apologize.  I'll try to describe my problem, let me know if I need to provide any additional information. I inherited a 5510 with 8.2.5 on it, writing the config to upgrade to current (and thus, going through ...

Hello :-) I got a Cisco 881 router and a asa5505 firewall. Whats the difference making an Site to site VPN with and without the tunnel-group command? I have seen configs with and without configuration og the tunnel command :-)

I am troubleshooting a VPN issue between an ASA5505 and and a checkpoint  The VPN comes up fine and all traffic outbound from the ASA (Remote Site) is working fine  However at random periods during the day inbound traffic fails - this can be up to 2...

I have an ASA5516X running 9.5(3) without a VPN configuration but a user pointed out to me that she needs to reconnect her Anyconnect VPN after computer sleeps when on a WLAN passing traffic through the aforementioned ASA while the problem isn't pres...

Hi all, I was wondering, what was the reason behind creating GRE? I mean, it's not secure, does not provide encryption, of course we can have it configure with IPsec but why would one want to configure an plain GRE tunnel ? In the end with GRE we co...

Hi! I can't setup VPN server properly. Using macOS VPN client, can't pass Phase 2. Cisco 861 Version: 15.4(3)M5 My config: aaa new-modelaaa authentication login USER-AUTH localaaa authorization network MY_GROUP local username alex123 password 7 ...

Dears, As the title imply, after applying a dynamic VPN on the outside interface of my firewall i can't seem to access it from outside, i need this to continue configuring my ASA after migration i'll close the access. Attached my configuration.

Hi, under my ASA in local there isn't any user and we don't' want to create one. We want everyone in our small office to have a Preshared key and with a Tunnel group that it, we don't want it to authenticate with the local user because we have none.E...