VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi, Guys I have a very strange problem in a remote access VPN. A VPN connects normally through the VPN Client software, but after that the VPN is established I can't ping my device in the LAN. Where I have a PC with IP 10.120.1.6, a notebook with th...

I have a problem with VPN configuration. I;m getting these two messages. i use anyconnect client. 4 Mar 02 2016 22:46:59 750003 Local:       Remote:           Username:Unknown IKEv2 Negotiation aborted due to ERROR: The peer's KE payload contained th...

Resolved! Anyconnect License

Hello, I've Cisco ASA 5550 with VPN Premium license & show version output it shows to licence for Anyconnect as. I want to understand what they refers AnyConnect Premium Peers : 4 perpetualAnyConnect Essentials : 5000 perpetualAnyConnect for Mobile :...

Hello, I've set up EzVPN on ASA Version 9.2(4)5. My goal is just to use the VPN pool address (10.11.10.x) to access everywhere instead of using my laptop's real IP address. NAT is not needed on the ASA outside interface. I even didn't configure the i...

Hi. We have Anyconnect (ver. 4.2.10135) configured on ASR1000RP1 (IPSec IKEv2). VPN is working from desktop, but doesn't work through RDP connection. In the XML file the following settings about remote session: <WindowsLogonEnforcement>SingleLocalLog...

Hi all, I have a problem on import/export SSL certificates from a VPN Concentrator 3060 to a smaller VPN Concentrator 3005. After exporting on 3060 the SSL certificate for each interface, and move the CERTEXP.TXT file on the new device (the 3005), I ...

Does anyone know how to allow PPTP Passthrough on a Cisco 867? I've got a Windows RRAS Server with PPTP configured however after installing the Cisco 867VAE the VPN clients cannot connect.I've tried allowing GRE however that didn't work, (Not shown i...

I haven't needed to use the VPN client for quite a while so I can't say how long this has been an issue for, but my clients can connect successfully but not access any resources. When I ping the inside int. I get replies from the outside int. and pin...

Hi all, I am using two Cisco 5520-X firewall in active and standby server. Both firewall is configured as Easy VPN server and using Cisco VPN client for RA users. I have only one public address 116.58.x.x configured on OUTSIDE interface. Whenever a...

Hello, I have a customer having a DMVPN network with two main sites (HQ and DR) and 44 branches. In HQ there are 2 routers and in DR there is one router. I have configured 3 tunnels from each branch router : one to HQ router 1, second to HQ router 2 ...