VPN

Our company is seeking to setup two sites to connect to Microsoft's Azure cloud.  Microsoft has not had and for that matter still does not have the any documentation on this done.  They had some information and now this has ben deleted what they did ...

Hi, I have the following  setup , tunnel (remotesec )is up but host cannot access group-policy VPN_GPO internalgroup-policy VPN_GPO attributes dns-server value 192.168.10.10 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunne...

I'm looking at needing to increase the volume-based lifetime SA on ipsec tunnels between an ASA running 8.4 and an ASR running 15 something. The ASR side has the ability to turn off the volume sa option, but I can't on the ASA at this code. What woul...

Hello  Team, can  you  please  help  me  to understand, if the  Site-A  VPN device is  Internat  facing and  Site-B VPN Device is  Behind another Firewall . The outside interface of the Site-B VPN device is NAT with  Firewall.  Can the Site 2 site V...

Is there any way to change the language on the AnyConnect client?The client prompts for UsernamePasscodeSecond Password I want to change what these say to Username PasswordRSA PasscodeAny help would be greatly appreciated. I can find how to change re...

Hi All,   I have configured a 4503 with SUP7L-E as a core switch for our infrastructure. But after every power outage the switch comes in ROMMON. After that I have to manually type "boot" to boot up the sysytem.  Please find the below " sh version" ...

hi guysi need documents about remote brigding and remote bridging over ppp (overview and configuration) couldnt find any useful one thanks 4 ur help

Hi Guys, We are using cisco 1841 router as a L2TP VPN client to connect to a VPN server. Our configuration is mentioned bellow: crypto ipsec transform-set ESP-AES256-SHA1 esp-aes 256 esp-sha-hmac mode transport! ip access-list extended ACL1 permit ...

I would like to make use of the client to gateway feature of the RV042 with Windows 10 clients. My preference is to use the Windows 10 native IPSec client with a shared key. I have the VPN working between an ASA and Windows 10 but not the RV042. An...

Hello All, I'm in need of some assistance as I'm going around in circles and to be honest I cant work it out.   I have a client who for the past 4yrs has 2 sites with buls standard ADSL+ at each location and an IPsec Gre tunnel between the 2.  The c...

Hi  I have an issue where we are creating a VPN to a different site where the subnets overlap. I am not in control of the other site so I cannot make any changes at their end so I have to assume everything is configured correctly.  I have set up the ...

Hi , With an existing gre over ipsec vpn network, can we deploy dmvpn. The spokes having only single public ip address available. On the top of it, gre over ipsec tunnels are running. So can we deploy and migrate  to dmvpn on the same interface with...

I use AnyConnect to connect to my university and map my school drive so that I can work.  Since upgrading to Windows 10.  I connect via AnyConnect and it indicates a connection has been made.  When attempting to map my drive it does not connect.  Cli...