VPN

We have a VPN connection between a cisco router and a sonicwall vpn, this was all working fine.Then our public IP was removed on the cisco side and now the ISPs firewall is in between the two devices. Now we are receiving errors in the phase 1 ISAKMP...

We have 14 Site-to-site connections configured on the main site ASA. We recently upgraded our license to Security Plus and now have 25 available "Total VPN Peers". However, the main site ASA is still only allowing 10 site-to-site connections at a tim...

I know the official answer will be it's not supported... but here's the issue. Installed Cisco AnyConnect client  v3.1.05182 on Windows 10 Preview. It installs just fine and the service is started. However, when attempting to connect we receive the e...

Hi,I have setup an anyconnect VPN solution that is used to securely access a section of the network. when uses use Anyconnect VPN internally with in the LAN all is well. the problem is when they try to do the same while loggin in remotely from home u...

Hi WHat DH group ASA support the following link shows 2-5 but i have been told that it does support 14? i am confused (LAN to LAN) ASA IOS 9.X http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/vpn_ike.html#...

Hello all,I cannot figure out how to configure an ASA 5506-X with software 9.5 to support DHCP Option 15 (DNS Suffix) for VPN Clients.I already configured it in the global DHCP configuration but it didn't help.Is there any way to specify a DNS Suffix...

Hi All,I have an ASA which terminates IPSEC VPN’s from both internal/private networks and from Public/3rd Party networks at the Edge.Can an ASA5500x running IOS9.3.x  register (trust points / enrolments) with multiple CA’s ?  (Private and Public)For ...

Below are my configs on cisco 2821 and I just want to connect/console  to the device connected with this console manager.Please tell me the command to console to the connected devices.Thanks,###########################################################...

Hi, can someone clarify the EOL notice for Cisco Anyconnect v3;http://www.cisco.com/c/en/us/products/collateral/security/anyconnect-secure-mobility-client/eos-eol-notice-c51-734084.html I am interested in the date in which software updates for Securi...

Hi,I'd like to create a ipsec tunnel from my router 887 to any client VPN but that's not working.I've got a good IP from my client vpn (172.16.2.1/16) but a wrong gateway (172.16.0.1)I cannot ping my gateway 172.16.0.254 or my server, why ? any idea ...

We got the following error message when we tried to open Cisco AnyConnect client "Connection attempt has timed out.  Please verify Internet connectivity".  We do have internet access.  We have Windows 7, 64-bit, SP1.  Is there a way to troubleshoot t...

Hello. Can anybody help to solve my problem.I have two sites connected to each other using IPSec VPN. Site A: ASA - LAN 172.20.120.0/24, WAN: 95.109.45.32/28, IPSec from Internet. Site B: Cisco 2821, LAN 172.16.0.0/16, WAN: 178.249.126.128/28. IPSec ...

Can I get the usage of local-pool in the MIB ? CLI command show ip local pool IP-PoolBegin           End             Mask            Free     Held     In use10.10.32.1     10.10.35.254   255.255.255.255  1014        0        2Available Addresses:10.1...