VPN

Hi,I'd like to create a ipsec tunnel from my router 887 to any client VPN but that's not working.I've got a good IP from my client vpn (172.16.2.1/16) but a wrong gateway (172.16.0.1)I cannot ping my gateway 172.16.0.254 or my server, why ? any idea ...

We got the following error message when we tried to open Cisco AnyConnect client "Connection attempt has timed out.  Please verify Internet connectivity".  We do have internet access.  We have Windows 7, 64-bit, SP1.  Is there a way to troubleshoot t...

Hello. Can anybody help to solve my problem.I have two sites connected to each other using IPSec VPN. Site A: ASA - LAN 172.20.120.0/24, WAN: 95.109.45.32/28, IPSec from Internet. Site B: Cisco 2821, LAN 172.16.0.0/16, WAN: 178.249.126.128/28. IPSec ...

Can I get the usage of local-pool in the MIB ? CLI command show ip local pool IP-PoolBegin           End             Mask            Free     Held     In use10.10.32.1     10.10.35.254   255.255.255.255  1014        0        2Available Addresses:10.1...

Does anyone script installation of AnyConnect and modules with an SMS such as IBM BigFix, Dell KACE, etc? I've run into a situation where, after installing the VPN client and DART, the Posture module refuses to install. In the BigFix agent's log, msi...

I understand Microsoft dropped IPSEC support in Windows 10. If this is true, does that mean you can't use FlexVPN with a router as a server with Windows 10 clients?

I want to be able to allow a userid access to Cisco devices in read only with no exec level permissions.They also need to be able to do a "sho run " and look at the full config file.The code below works well for IOS V15 and Works on Device Ie3000 wit...

We primarily run split-tunnel on our ASA-5555X server for Anyconnect clients, but at times we'd like to provide tunnelall service through a Group selection.  Since tunnelall requires NATing on an interface, is there a way to run both split-tunnel con...

I am trying to create a new vpdn session on a cisco 7206c7200-advipservicesk9-mz.152-4.M7.bin We have ruckus brand APs that have a tunneling feature on them and are tunneling them back to a cisco router is l2tp bridged to the ethernet egress port.  T...

I have an ISA550W deployed at our office locations. For remote access I am testing AnyConnect v3.1.05187. The laptops I'm testing on have Windows 8.1 Pro Update with all of the latest patches as of this post. I read the release notes and as a consequ...