VPN

Hello,I’ve got a problem with my ASA 5510 and my L2TP/IPSec VPN.In my environment, there is an active directory domain controller, a radius-server (NPS) and the ASA 5510 (Version 9.1(5)21). The ASA is configured to authenticate the users using EAP-PR...

I have an issue when I initially connect to my remote network, I cannot get to any mapped drive unless I wait a few minutes for the VPN connect to mature. To explain further, I have to wait 2-4 minutes after connecting to the VPN for me to actually c...

Dear Community, Can one influence the max. packet size of ISAKMP packets of the other party when creating site-to-site VPN just like the analogy when you use "ip tcp adjust-mss" and inform the other party about our max. MSS?Thing is: I try to establi...

Hello friends,I used backtrack OS for VPN tunnel penetration. Encryption,authentication,hash value as well as hash value of PSK were found during penetration .Now my Q is ,Can we prevent it ,If yes ,how can do it .If No - what is the resion behind it...

I have a client that currently has a Cisco ASA 5510 that works perfectly, they recently purchased a 5512 to replace it. The 5512 has been in production for a few months and then yesterday the VPN speed using the Cisco VPN client just went to crap. Th...

Hello and thanks in advance for your help. I am way over my head on understanding my issue and the more i read the further down the rabbit hole of confusion i go.Long story short i work as an IT admin and ive been given an ASA to connect to a remote ...

I need to authenticate users from two separate AD LDAP databases on the same tunnel-group. I would like them to use the same tunnel-group and thereby using the  same group-alias. I tried creating a new aaa-server group and putting both LDAP servers i...

Updated one of our computers to Windows 8 but can't seem to find windows 8 vpn client software for the cisco 871 router...only XP & Vista..?  Anyone know of a workaround..?

Hi, we're using anyconnect 3.1 for our VPN and have a requirement to accept iPhones and iPads on the VPN. Our IOS devices are controlled via an oem MDM (Airwatch). We cannot seem to get Anyconnect to recognize the Airwatch certificates on the IOS dev...

This is what happens when i try to load new software to the ASA.   FW-1# copy tftp disk0Address or name of remote host [x.x.x.x]?Source filename [asa822-k8.bin]?Destination filename [disk0]?Accessing tftp://x.x.x.x/asa822-k8.bin...!!!!!!!!!!!!!!!!!!!...

Whe configured are anyconnect and it is working the connection is alive. Whe can ping from the inside 2 the outside client so thats oké. But we can't ping from outside to a inside user. When we do a trace  (from outside => inside ) we get this error ...

Hi All, Can anyone tell me how to view the current replay window size in ASA 5550?sh run crypto | in replaThe above command does not fetch me anything. Is there a way that I could confirm if the replay window-size is 64 (i am assuming ) which is defa...

Hi EveryoneI am struggling with this since last 10 days and don't have any clue where it is going wrong. Hoping someone could help me in configuring it.We have Cisco ASA - 5515-X running and recently I have enabled the Remote Access VPN with the belo...