VPN

Hi guys,Is possible change installation path for web-deploy of Cisco Anyconnect 3.x or 4.0 installed from ASA?In my case, I need upgrade client from version 2.5 to 3.X or 4.0 and I need achive directory like in 2.5 version.Version 2.5 directory: "c:\...

Hi. I'm interested in how much traffic goes through my site-to-site tunnels. I have about 5 tunnels set up and I can only see the load on each interface with "sh interface giga 0/0" and beside the "30 second input rate". Is there any way of seeing th...

Has anyone seen an issue with using RADIUS between a Cisco ASA5510 and a Windows 2008 NPS server? I had an issue some time ago where I continuously see both configured RADIUS servers marked as failed and then marked and active over and over. After a ...

Hi, I have a big problem here.I have a 5520 ASA and I've upgrad the iOS from 8.4(2) to 9.0(4), SSL VLP and AnyConnect works but L2TP is dead, and I don't know why.The client receive error 809. The ASA is behind Internet Firewall that NAT the original...

I have an AS5350XM with an NP108 dial-only feature card which is EOL so I need to replace it.  It uses rotary groups and async lines to do dial on demand using an ISDN PRI circuit and dialer profiles.  It is used to dial out to modem attached custome...

I noticed that after installing the VPN client on my machine that it has changed the MTU size to 1300 on all of my adapters. Is there a reason that it changed the values on all adapters and not just the Cisco virtual adapter? Obviously when I am not ...

Hello:I upgraded to a new computer running OSX Mavericks 10.9.4 and I am using the anyconnect-macosx-i386-2.5.2017-k9.dmg client (imposed by the company I work for).Previously I had Mountain Lion 10.8.5 and never had any issues of this sort. Not sure...

We're a little confused by information in the release notes on supported Mac operating systems:Anyconnect 4.0.00048:Mac OS X 10.7, 10.8 & 10.9 x86(32-bit) and x64(64-bit)Anyconnect 3.1.05187:AnyConnect 3.1.05187 also adds support for Mac OS X 10.10. ...

I had this question: https://supportforums.cisco.com/discussion/12286866/osx-mavericks-1094-posture-assessment-failed-hostscan-prelogin-errorbut nobody answered... Now I was wondering of anyconnect 2.5.2017 works with yosemite...Thanks!  

Hello. I have configured a KS and added the configs for a co-operative KS (co-operative KS was not configured; I was supposed to add it later).All GM were not able to register until I erased all redundancy configs... before erasing configs, KS return...

Hello,After reading the documentation there is no clear picture how the implementation of Dynamic Access Policy Network ACLs interacts with existing access-lists such as a remote access vpn-filter.Are the DAP Network ACLS processed first then if ther...

Hello, We have a customer who's experiencing problems with their ipsec tunnels. Details:1 Mainsite in our datacenter.4 Remote sites, 1 is our office for testing/troubleshooting purpose.All remote sites have an ipsec tunnel to our Data center.1 tunnel...