Showing results for 
Search instead for 
Did you mean: 

Forum Posts

VPN Tunnel Default Gateway/Routing

Hi Guys I have a similar network to the one explained in this document http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd805f0bd6.htmlMy vpn traffic is able to communicate with hosts behind my in...

Resolved! IP SLA

Hi Expert,I'm testing IP SLA on my Cisco 2921. I just wonder what will happen if evaluation period reach, does it stop working?Thanks,Boren

L2L VPN traffic is not leaving on tunnel

Hello Experts,We have a Site to site VPN set up to client and a new IP 67.22.X.X is been added over the VPN tunnel recently at both the sides. i do see successfull Phase 2 tunnel up for the 67.22.X.X but the encry/encaps are not incrementing over the...

Resolved! VPN Dual Nic Access Problem

Here is how the network looks like: WorksI can access everything from 16.0 to 3.0 and vice versa.I need to access 3.0 from the SBS2003...

sjoshi321 by Beginner
  • 1 replies
  • 0 Helpful votes

Cisco Anyconnect VPN dhc-network-scope

I have change  the dchp-network-scope on an existing Cisco anyconnect group policy, but dhcp leases are still been issued from the previous dhcp scope. The DHCP sever is on the inside network  and has not changed.  A new scope was created. Nothing el...

dasgill by Beginner
  • 2 replies
  • 0 Helpful votes

Resolved! Reverse VPN

Experts, I'm currently implementing appliances from Dell Secureworks and they told me the inspector appliance establishes a reverse VPN. Out of curiosity, what is a reverse VPN? What kind of impact does this have on my ASA 5515-X from a configuration...

ADSM password after upgrade

I have an ASA 5505 given to me that I am trying to reset.Reset factory defaults and updated ASA to 8.4.7 and ADSM to 7.1.4. At this point I was still able to connect using ADSM with no username/password.Updated ASA to 9.1.3. This is the only change t...

Resolved! vpn over ethernet

Hi,I am reposting this thread, sorry for that.Is it possible to run remote access vpn for users over metro ethernet, as the users will be logging in to the HQ using remote access vpn over metro ethernet link. This metro ethernet link connects the HQ ...

suthomas1 by Frequent Contributor
  • 5 replies
  • 0 Helpful votes

Resolved! Configure NAT for object-group in 8.3

I am working on a project to simplify our routing by NAT'ing the IP's of our S2S VPN clients.  Currently, the we have a bunch of routes pointing to various destinations which are created by the S2S VPN's.  I would like to NAT all of those destination...

Cisco AnyConnect VBS Scripting OnConnect

           I have setup on the SSL VPN ASA scripts_OnConnect.vbs that maps the users P drive when users login via AnyConnect. This works fine. I have a request to run a file once a user logs in via Cisco AnyConnect.    It normally runs when a user is...

swnorth99 by Beginner
  • 0 replies
  • 0 Helpful votes

ipsec vpn client

Hi,We would be setting up an remote access ipsec vpn on asa & following the cisco documentation on it.But, can we just download any vpn client available on cisco site to be installed at users laptop or is there any specific ones we need to look at.Th...

suthomas1 by Frequent Contributor
  • 4 replies
  • 0 Helpful votes

Resolved! Router or ASA

Hi every body,I work in a company which has around 60 users,actually we have an old  fortinet firewall with an old IOS  version,we have some problems with vpn tunnel.We decided that we must change this firewall and put something else in it place.so i...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers