cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
255
Views
0
Helpful
2
Replies
Highlighted
Beginner

Can't access remote network from VPN tunnel at Company Network

Hi,

I can VPN and access remote network by using the connection from ISP dialup or ADSL. But can not access any remote host from VPN tunnel being established from my company network. Any Clue ? Please advise. I'm using Cisco VPN Client 3.03a and 3.1 with VPN 3000 concentrator.

Cheers,

Tony Chua

2 REPLIES 2
Highlighted
Frequent Contributor

Re: Can't access remote network from VPN tunnel at Company Netwo

You have a hub and spoke configuration? You are a spoke tunnel. You can access all resources at the hub but not another spoke? If that’s a correct understanding, then you need to reconfigure the concentrator to allow you access. Add the network under the network lists page. Details: http://www.cisco.com/univercd/cc/td/doc/product/vpn/vpn3000/vpn3kco/vcoug/usr_3_0/polmgt.htm

Highlighted
Beginner

Re: Can't access remote network from VPN tunnel at Company Netwo

Access is only allowed in one direction. From Clent to Concentrator, not vice versa. If the tunnel is already initiated from client side to head end, you may be able to access the host but I know for sure the the tunnel can ONLY be initiated from client side.