07-25-2007 06:31 AM - edited 02-21-2020 03:10 PM
I can ping PC's over our remote VPN (concentrator to a remote Pix) but not the Pix that is over at the remote site. I am trying it's local IP address over the VPN.
However the PC's on the Pix's LAN can.
I can get on the ADSM using the Pix external IP, but I'd rather use the internal IP over the VPn tunnel.
Let me know what info you need.
07-25-2007 06:35 AM
Hi, you should use the "management-access inside " command.
07-25-2007 06:40 AM
Hi, how can I do this via the ADSM?
07-25-2007 06:44 AM
Please check here: http://www.cisco.com/en/US/partner/products/ps6121/products_user_guide_chapter09186a0080810292.html#wp1279818
I hope this helps.
07-25-2007 06:47 AM
Why is it I can't log into that with my forum username and password? Do I need a high level?
07-25-2007 06:51 AM
07-25-2007 07:02 AM
Sorry too about this, but I can't find this managment pane to enable this option on an interface via the ADSM.
07-25-2007 07:15 AM
Ok, and I really don't know about asdm.
Try to get on the console with ssh and enter the command, that must be a lot easier.
07-25-2007 07:15 AM
Try this...
Tools -> Command Line Interface -> Select Multiple line -> In the text box type...
config t
management-access inside
and select "Send"
07-25-2007 07:20 AM
I'll try that this won't change my current access over the Internet?
07-25-2007 07:22 AM
No. It will only enable management access over the vpn.
07-25-2007 07:24 AM
No, it should only change access when connected to the ASA via the vpn.
07-25-2007 07:25 AM
The reason I can't ping it over the VPN but can on-site, could this be a rule issue?
07-25-2007 07:28 AM
Probably not, it is most likely that you are missing the command posted above. Did you add it?
Read here...
http://cisco.com/en/US/docs/security/asa/asa72/command/reference/m_72.html#wp1794331
07-25-2007 07:30 AM
This is the error I got:
Result of the command: "conf t"
The command has been sent to the device
Result of the command: "management-access inside"
management-access inside
^
ERROR: % Invalid input detected at '^' marker.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide