10-09-2012 12:07 PM
I've a ASA5505 that I'm configuring to accept Clientless SSL VPN remote connections. Each user attempting to connect must have a client certificate matching their user name. 2nd factor in the authenication process is the user account/pwsd in our Active Directory.
I have a CA (W2k8), that I'll use to issue the client certificates with. I thought I'd issue a certificate for the clientless web site, too, but I don't know how to generate the request.
I'm running ASDM 6.4(9), and ASA version 8.4(4)1.There isn't much helpful information in the Certificate Management configuration section. I assume I need an entry for CA Certificates, but don't really understand what for, nor how to add them. And I assume I'll need an entry in the Identity Certificates, but again, I don't know how.
So far I haven't found helpful documentation on the whole process. Can someone point me in the proper direction?
Thanks
Solved! Go to Solution.
10-09-2012 12:25 PM
Hi Sam,
Please check this out:
ASA 8.x Manually Install 3rd Party Vendor Certificates for use with WebVPN Configuration Example
AnyConnect Certificate Based Authentication
Please let me know if you have any questions.
Portu.
Please rate any helpful posts
10-09-2012 12:25 PM
Hi Sam,
Please check this out:
ASA 8.x Manually Install 3rd Party Vendor Certificates for use with WebVPN Configuration Example
AnyConnect Certificate Based Authentication
Please let me know if you have any questions.
Portu.
Please rate any helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide