cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
199
Views
0
Helpful
5
Replies
Highlighted
Beginner

Cisco Anyconnect and local network.

Hello,

When I'm using Cisco Anyconnect for access to a VPN server, then I can't access to local network and local printers that connected to network by NIC.

I selected "Enable local LAN access" option too, but problem not solved.

How can I solve it?

 

Thank you.

5 REPLIES 5
Highlighted
VIP Advisor

Hi,

You will need to also configure split tunnelling on the ASA, example:-

 

access-list ALL_EXCEPT permit host 0.0.0.0
group-policy GP-1 attributes
split-tunnel-policy excludespecified
split-tunnel-network-list value ALL_EXCEPT

Refer to this post for more information

 

HTH

Highlighted

I should configure it on VPN server? 

Highlighted

Hello.

 

Yes, you should configure this parameter (split exclude or split include) on the device that you are using anyconnect- ASA, Firepower, etc

 

http://blog.soundtraining.net/2013/03/how-to-configure-split-tunneling-on.html

 

https://integratingit.wordpress.com/2019/03/16/asa-split-tunnelling/

Highlighted
Beginner

As you see, We defined the Route as below:

photo5994411028563211256.jpg

All local network ranges defined.

What is the problem?

 

Thank you.

Highlighted
Beginner

What is my problem?