cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
67757
Views
25
Helpful
49
Replies
Highlighted
Beginner

Cisco AnyConnect Secure Mobility Client on OS X Yosemite - VPN not working if the Mac is connected via Iphone HotSpot

I have encounter a starange situation with Yosemite and Cisco AnyConnect Secure Mobility Client (all recent versions including latest 3.1.05187).

If the mac is using the internet connection of the iPhone (via Bluetooth or WiFi), when I connect with the client everything stops working, from the Internet to the traffic over the tunnel, we are using Split Tunnel with Split DNS for our internal addresses. Somehow the DNS is not working anymore.

I can ping via IP but not by name, also cannot ping any address from internet unless I add again manually the default route.

 

Anybody encounter this problem?   

49 REPLIES 49
Highlighted

Which update are you talking about ?

Just try to enter "client-bypass-protocol enable" in group-policy attributes section using CLI

Highlighted

It seems our version of ASDM doesn't have that option, it has the rest but not "Client Bypass Protocol"

 

I wonder if its a config setting somewhere else to enable it.

Highlighted

In my previous comment I described how to do this in CLI. You don't even need ASDM to configure ASA

Highlighted

I have "Client Bypass Protocol" disabled. Connections from tethered networks are now fine on the latest ASA, AnyConnect 3.1 and OS X software after effecting tim.economides suggestion.

Highlighted

Is there an equivalent to this command for webvpn configured on an ISR router?  I can't seem to find it if so.