06-25-2012 12:07 PM
Hi,
I have a Cisco ASA 5505, with basic 50 license, that is connected directly to the Cable Modem with a public IP. I have VPN configured and active on the Outside interface. When we connect, we connect just fine with no errors, but we are not able to access any resources on the remote network.
ASA IOS version 8.2(5)
Remote Network IP: 10.0.0.0/24
VPN IP Pool: 192.168.102.10 - 25
I have attached the config: llc.txt
Please let me know if you have any questions.
Thanks!
Solved! Go to Solution.
06-25-2012 01:32 PM
Hi,
Try by adding NAT 0 for inside subnet --> remote subnet
nat (inside) 0 access-list TEST
access-list TEST extended permit ip 10.0.0.0 255.255.255.0 192.168.102.10 255.255.255.224
hth
MS
06-25-2012 01:32 PM
Hi,
Try by adding NAT 0 for inside subnet --> remote subnet
nat (inside) 0 access-list TEST
access-list TEST extended permit ip 10.0.0.0 255.255.255.0 192.168.102.10 255.255.255.224
hth
MS
06-25-2012 02:28 PM
Hi,
That worked for me on my machine. I will know more tonight or first thing tomorrow morning if it worked for the owner.
Will let you know.
Thanks for the help!
06-25-2012 02:58 PM
yeah, that nat position will get you every time.
06-25-2012 09:07 PM
Hi,
That did it. He was able to access his server remotely with VPN.
Thanks for the help!
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide