Cisco ASA 5525 not passing VPN Site to Site traffic, last time I fixed the issue I issued the command::
nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.25.1.0 obj-172.25.1.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.16.0.0 obj-172.16.0.0 no-proxy-arp route-lookup
nat (inside,outside) source static obj-172.18.0.0 obj-172.18.0.0 destination static obj-172.30.0.0 obj-172.30.0.0 no-proxy-arp route-lookup
but I'm getting the error :: obj-172.20.0.0 doesn't match an existing object or object-group (as example)
I dont' remember how to manually put in the object group (I guess).
I put in
object network obj-172.20.0.0
subnet 172.20.0.0 255.255.0.0
which did not work, same error..
I see object group but not sure how it should be grouped or entered?
Help would be appreciated
Thank You
Thank You