Hello,
I have a cisco asa 5505
with following configuration :
inside 172.17.7.4
outside public fixed ip (dhcp)
Interal range 172.17.4.0/24
VPN Range 10.232.0.200 - 10.232.0.205 used with Cisco vpn client
3 Site2SiteVPN Tunels (Ikev1/IPSec AES256 SHA1) on outside interface
172.17.4.0/24 <-> 172.16.0.X / 172.18.0.X
172.17.4.3 <-> 10.233.0.10
172.17.4.0/24 <-> 192.168.23.0/24
.2.50
If I test my client vpn connection i'm able to access 172.17.4.0/24 but i would like to connect to 172.16.0.X and 172.18.0.X network ...
What would be the best practice to configure
this without changing a lot to the Tunnel configurations at 172.16.0.X / 172.18.0.X side.
thanks for your advice :)
Kind Regards