cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
181
Views
0
Helpful
1
Replies

Cisco ASA VPN

rakeshvelagala
Level 3
Level 3

Dear All,

Please advise on the below.

We have a setup as below.

Anyconnect VPN Client-----------(Outside)ASA 1(outside)---------ISP-----------(Outside)ASA 2-----------Internal Network

 

Say the IP we get after connecting successfully using Anyconnect is 10.1.1.1/24

1)Say when a client got connected successfully to ASA  Using Anyconnect VPN, according to the ASA, is the traffic originating from inside interface or outside interface?

We have a specification to do NAT for this  IP (10.1.1.1) as Static to specific source address say 100.100.100.100 if the VPN user is initiating a connection to some specific public IP say 1.1.1.1(Goes through outside interface again)

Our NAT statement should be

nat (outside,outside)

or

nat (inside,outside)

Kindly advise.

 

Thanks

 

 

1 Reply 1

jj27
Spotlight
Spotlight

Outside.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: