cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
38
Views
0
Helpful
1
Replies
Highlighted
Participant

Cisco ASA VPN

Dear All,

Please advise on the below.

We have a setup as below.

Anyconnect VPN Client-----------(Outside)ASA 1(outside)---------ISP-----------(Outside)ASA 2-----------Internal Network

 

Say the IP we get after connecting successfully using Anyconnect is 10.1.1.1/24

1)Say when a client got connected successfully to ASA  Using Anyconnect VPN, according to the ASA, is the traffic originating from inside interface or outside interface?

We have a specification to do NAT for this  IP (10.1.1.1) as Static to specific source address say 100.100.100.100 if the VPN user is initiating a connection to some specific public IP say 1.1.1.1(Goes through outside interface again)

Our NAT statement should be

nat (outside,outside)

or

nat (inside,outside)

Kindly advise.

 

Thanks

 

 

Everyone's tags (1)
1 REPLY 1
Highlighted
Rising star

Outside.

Outside.