Cisco GSR 12406 SSH access/configuration problem

[peteroseneff]

Hello.

I've configured SSH server on the router according to the following document:

Configuring Secure Shell on Routers and Switches Running Cisco IOS

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

Result - I'm unable to access to router's vtys using SecureCRT SHH client

Debug 'debug ip ssh' shows the following:

=

Jul 17 14:10:23 MSD: SSH: throttling requests: Please try after some time

=

Searching the web doesn't return anything useful. It seems that this type of error message doesn't exist on the internet.

Any thoughts?

[peteroseneff]

I've fixed the problem by reseting all ssh configuration statements to defaults.

Now everything is ok with these:

ip ssh time-out 120

ip ssh authentication-retries 3

transport input ssh

[andrew.prince]

There maybe to many requests due to the client trying encryption protocols, limit the client to use

AES

3DES

DES

and try again

HTH>

[peteroseneff]

Hi Andrew,

No more problems since I reset SSH server configuration. But I'll try it anyway to improve SSH connectivity.

Thanks.