Using the newest version of Cisco VPN Client 5.0.07.0410
We have a remote office that VPNs in to connect to the main network to access internal resources.
On 7.2 they worked perfectly fine, once we did the upgrade to 8.4 they can still connect, but if you look at their session in the monitoring window of the ASDM they are passing 0 bytes of traffic sent and received and cannot access any of the internal resources.
This computer is connected directly to a DSL modem and going out to the internet, it isn't behind any funky routers or firewalls or anything. I've tried different VPN accounts from this office (like mine for example) and it does the same thing. It seems the issue is site related not account related
When I connect the VPN client at the site and look at the statistics for the connection I see the following or something like it
The Bypassed Packets just tick up and up and up continually as well as sent bytes but thats it.
What the heck is going on here?
Oh and I tried the account that this site uses from my house and it worked fine from there.
I have 30+ other VPN users with various client versions and Ipads and they ALL work fine with NO problems at all.
Is it possible that this has something to do with the ISP that this site uses or do I need to configure something different in their DSL modem?
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...