Hi. I have some issue with cisco vpn client on windows 7 64-bit. I have successfully connect to vpn server, can do the ping the needed server in lan can connect to him via telnet to check connection but when I to try realy connect via ssh via many different software, They was try to establish connection and after some timeout write that connection was closed. In which direction I need to go to find solution for this issue from Linux connection via ssh has no problem.
have you checked the logs in ASA to see if there is a drop? You could also set up a packet capture to see if traffic is passing to and from the server. change the interface name and add server IP as needed.
cap capin interface inside match tcp host <server IP> 22 any
cap capin interface inside match tcp any host <server IP> 22
show cap capin
Please remember to select a correct answer and rate helpful posts
-- Please remember to select a correct answer and rate helpful posts
the issue is that I have no connection only via ssh only to one host that is console for connection network devices via console. Another ports to connect is working. This happened only when I connected to my oofice vpn? for another vpn everything is work perfect. In which direction I must look for ?