client Vpn to Central PIX redirect traffic to remote PIX

[gfaucher]

hi, I use 2 to PIX. One is Central PIX 515E with static IP and vpn access. The other is REOMTE PIX 506 with dynamic IP address one WAN interfaces.

The Pix506 connect to Pix51Ë with succes. I use Client VPN Cisco version 4.05(B) with Workstation for connect Central PIX 515Ë. Workstation ping inside lan network on Pix515 with succes. Workstation unable ping inside LAN remote PIX 506.

It's possible connect with workstation to Central Pix515 and redirect traffic to inside lan of remote PIX506?

thank you

[matthew.long]

This is not possible as the 2 vpn connections use the same interface. On a pix you cannot have a data connection entering and leaving via the same interface.

If you have spare interface you can 2 interfaces on the outside of the network and terminate the site vpn on one and the user vpn on the other and this will allow what you want.

See:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093bd3.shtml