03-27-2008 01:35 AM
Hi,
I would like to know where can I get help to write the configuration for a 3845 that uses 2BRI. I could not find any documentation to help me to get this information.
Thank you,
Cheers,
- sanjay -
03-27-2008 01:47 AM
Hi, Sanjay, Can you come with more specifically? Thanks Goutam
03-27-2008 04:50 AM
What I am looking for is how do I configure the 2BRI's to function, setting up the clocking, the async interfaces on this 3845. I need assistance in writing this configuration.
Thank you,
Cheers,
- sn -
03-27-2008 11:48 AM
Sanjay - Your requirement is still not clear, do you have a 3800 with Digital modems (MICA) and want async call to then over the 2 BRI interfaces? Is the BRI on a WIC or NM module?
Digital modem calls over WIC BRI is not supported. We will need a BRI NM (Network Module) card to support digital modems.
A sample configuration for the same (note this is on the 3600 platform but will remain the same)
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080093c6e.shtml
Thanks, Mak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide