Configuring Cisco IOS EzVPN Client with CVPN 3005

[p.tavan]

Hi,

I have configured the Router and the CVPN 3005 with the procedure described in the doc Configuring the Cisco EZVPN Client with VPN 3000 Concentrator.

But when I enter : crypto ipsec client ezvpn xauth on the router, and give the user / password, then I have the error message in the Concentrator Event log :

User (User name) authenticated

but it is followed by the error :

Group (group name) User (user name)

Cannot obtain an IP address for remote peer.

So, in the User > Identity definition, I have entered an IP Address to be assigned, but it did not solve...

Many thanks if you can help me.

Patrice

[llascare]

I believe that you have set up the EzVPN on the router as Client Mode.

If you have assigned a static IP address for the user on the Concentrator, then make sure that under "Configuration | System | Address Management | Assignment", you have a check mark where it says: "Use Address from Authentication Server". Please let me know if it did the trick.

[p.tavan]

Hi,

I thank you for your answer which gave me an idea :

it was because I had not created an assigned pool.

It works now.

Cheers.