cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
13811
Views
0
Helpful
2
Replies
thomasmcleod
Beginner

Configuring Cisco router for IPSec VPN with Windows 7 builtin VPN client

Where can I find an example config for IPSec VPN where Windows 7 native client connect to Cisco routers. I'm using the cisco 881w, in this case.

Thomas McLeod

1 ACCEPTED SOLUTION

Accepted Solutions
Andrew Phirsov
Rising star

Windows native client only supports L2TP over IPSec. Example in the end of this doc sould be sufficient for you:

http://www.cisco.com/en/US/docs/security/vpn_modules/6342/configuration/guide/6342vpn4.html#wp1036111

I haven't personally configured L2TP/IPSec on IOS, only on ASA, so can't be 100% sure the config in the link will work, but general idea should be ok.

View solution in original post

2 REPLIES 2
Andrew Phirsov
Rising star

Windows native client only supports L2TP over IPSec. Example in the end of this doc sould be sufficient for you:

http://www.cisco.com/en/US/docs/security/vpn_modules/6342/configuration/guide/6342vpn4.html#wp1036111

I haven't personally configured L2TP/IPSec on IOS, only on ASA, so can't be 100% sure the config in the link will work, but general idea should be ok.

Create
Recognize Your Peers
Content for Community-Ad