cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
824
Views
0
Helpful
2
Replies
Highlighted
Participant

Configuring ressource-pool or equivalent on ISR-G2

Hi we have two AS5350 in Production which reached LDOS end of last year.

On this AS5350 is implemented a special Service which has to be offered in the future as well where they need digital Modems (details to this Service later on). so customer wants to migrate to a new HW, like to a ISR-G2 2951 with PVDM2-ADPTR , PVDM2-36DM and VWIC3-2MFT-T1/E1 .

So on the running AS5350 we have a config like following.

ip host gpsstream_port4101 4101 172.18.100.11

...

ip host gpsstream_port4201 4201 172.18.100.11

...

ip host gpsstream_port4301 4301 172.18.100.11

...

!

resource-pool enable

!

resource-pool group resource RTK

range port 1/0 1/14

!

resource-pool group resource DGPS

range port 1/15 1/24

!

resource-pool group resource MGPS

range port 1/25 1/29

!

resource-pool profile customer RTK

limit base-size all

limit overflow-size 0

resource RTK speech

dnis group RTK

!

resource-pool profile customer DGPS

limit base-size all

limit overflow-size 0

resource DGPS speech

dnis group DGPS

!

resource-pool profile customer MGPS

limit base-size all

limit overflow-size 0

resource MGPS speech

dnis group MGPS

!

controller E1 3/0

pri-group timeslots 1-31

!

interface Serial3/0:15

description S2

no ip address

isdn switch-type primary-net5

isdn caller 436641061498

.......

isdn caller 436641509409

isdn incoming-voice modem

no cdp enable

!

interface Group-Async0

no ip address

group-range 1/00 1/59

!

dialer dnis group DGPS

number 2

!

dialer dnis group MGPS

number 3

!

dialer dnis group RTK

number 1

!

line 1/00

no motd-banner

no exec-banner

exec-timeout 0 0

no flush-at-activation

logging synchronous

no vacant-message

login authentication nologin

modem InOut

autocommand telnet gpsstream_port4101 /stream

no activation-character

special-character-bits 8

transport input all

escape-character NONE

autoselect during-login

autohangup

...

...

line 1/15

no motd-banner

no exec-banner

exec-timeout 0 0

no flush-at-activation

logging synchronous

no vacant-message

login authentication nologin

modem InOut

autocommand telnet gpsstream_port4201 /stream

no activation-character

special-character-bits 8

transport input all

escape-character NONE

autoselect during-login

autohangup

...

...

line 1/25

no motd-banner

no exec-banner

exec-timeout 0 0

no flush-at-activation

logging synchronous

no vacant-message

login authentication nologin

modem InOut

autocommand telnet gpsstream_port4301 /stream

no activation-character

special-character-bits 8

transport input all

escape-character NONE

autoselect during-login

autohangup

What we achive with this configuration is that based on the called number (specified in DNIS group) we are connected to a Host with a particular tcp-port (different ressource-pools and different autocommands on the lines)

The configuration of ressource-pools and ressource-pool groups is not supported aon the ISR-G2 (G1 as well)

So the question how to mirgrate our config to an ISR-G2 ?

(ther is a command modem-pool und which you can configure the lines and the called number, maybe this is a way to configure the same, but I do not have equipment to test this)

Thx

Hubert

Everyone's tags (2)
2 REPLIES 2
Highlighted
Hall of Fame Master

Configuring ressource-pool or equivalent on ISR-G2

The ISR G2 router do not support all AS features.

You can use the 5400 to replace 5350.

Highlighted
Beginner

Re: Configuring ressource-pool or equivalent on ISR-G2

Hubert, did you resolve this problem? We require the same for our RTK network and need a suitable replacement for our AS5350XM's.

I should add - we are not using resource-pools but do need the autocommand telnet /stream function.