Copy Cisco AnyConnect Installer from ASA to TFTP Server

[SamsonOjo]

I transferred Cisco AnyConnect from Cisco ASA flash to TFTP server, it came out as .PKG file. My intention was to copy the cisco AnyConnect installer from the ASA and then use it to install Cisco AnyConnect client on a Linux ubuntu. The file that I transferred to the TFTP is not useful to me. Below is the command that I used.

AS#copy flash:/anyconnect-linux64-4.5.00058-webdeploy-k9.pkg tftp

Source filename [anyconnect-linux64-4.5.00058-webdeploy-k9.pkg]? (enter)

Address or name of remote host []? 10.101.x.x

Destination filename [anyconnect-linux64-4.5.00058-webdeploy-k9.pkg]? (enter)

20148996 bytes copied in 11.220 secs (1831726 bytes/sec)

[Rob Ingram · Accepted solution]

@SamsonOjo the webdeploy package you copied is for headend deployment from the ASA itself, it is not used for manualling installing on the client computer. You would need to download the predeploy package from the Cisco website. You will need the ASA to be in support in order to download the package.