02-13-2019 05:29 AM
I am trying to understand what license(s) I need to enable VPN on my C897VA-K9 License info below
OIS-02-VDSL#show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: advipservices_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 1 Feature: SSL_VPN Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: 10/0/0 (Active/In-use/Violation)
License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0 Feature: advipservices_npe Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 1 Feature: ios-ips-update Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 2 Feature: MEM-8XX-512U1GB Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 3 Feature: WAAS_Express Version: 1.0
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Do I need both the VPN license and the security license for the VPN features to be enabled at present the crypto command is limited to:-
OIS-02-VDSL(config)#Crypto ?
key Long term key operations
pki Public Key components
provisioning Secure Device Provisioning
wui Crypto HTTP configuration interfaces
so there is no
crypto isakmp policy 1 etc
Any help appreciated
Regards
02-13-2019 09:28 AM
chrishey6489,
Can you add a show version? If i am not mistaking looks like you have a NPE (non payload encryption) image on your Router meaning you are not going to have that type crypto capabilities.
Hope this info helps!!
Rate if helps you!!
-JP-
02-13-2019 11:43 AM
Thanks for you response
Output from show version
OIS-02-VDSL>enable
OIS-02-VDSL#show version
Cisco IOS Software, C800 Software (C800-UNIVERSALK9_NPE-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 16:14 by prod_rel_team
ROM: System Bootstrap, Version 15.2(3r)XC, RELEASE SOFTWARE (fc1)
OIS-02-VDSL uptime is 1 day, 5 hours, 56 minutes
System returned to ROM by reload at 14:34:31 UTC Tue Feb 12 2019
System image file is "flash:c800-universalk9_npe-mz.SPA.152-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco C897VA-K9 (revision 1.0) with 488524K/35763K bytes of memory.
Processor board ID FCZ175090DV
1 DSL controller
1 Ethernet interface
9 Gigabit Ethernet interfaces
1 ISDN Basic Rate interface
1 ATM interface
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C897VA-K9 FCZ175090DV
License Information for 'c800'
License Level: advsecurity_npe Type: Default. No valid license found.
Next reboot license Level: advsecurity_npe
Configuration register is 0x2102
So yes would seem advsecurity_nep has not valid license found - how do I get a licence ?
Any help appreciated
02-13-2019 11:45 AM
03-05-2019 10:57 AM
Chris,
At this point is not a matter of license, so you only need to go to cisco.com and download the right version of IOS:
That's just an example you can look for the same Universal image but for the same version you are currently running.
Hope this info helps!!
Rate if helps you!!
-JP-
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: